Indentation properties of plasma sprayed Al2O3-13% TiO2 nanocoatings

被引：35
|
作者：
Rodriguez, J. [1 ]
Rico, A. [1 ]
Otero, E. [1 ]
Rainforth, W. M. [2 ]
机构：
[1] Univ Rey Juan Carlos, Dept Ciencia & Ingn Mat, Madrid 28933, Spain
[2] Univ Sheffield, Dept Mat Engn, Sheffield S1 3JD, S Yorkshire, England
来源：
ACTA MATERIALIA | 2009年 / 57卷 / 11期
关键词：
Ceramic coatings; Plasma spraying; Nanoindentation; Nanostructure; ALUMINA-TITANIA COATINGS; MECHANICAL-PROPERTIES; WEAR-RESISTANCE; MICROSTRUCTURE; CERAMICS; BEHAVIOR; HARDNESS;
D O I：
10.1016/j.actamat.2009.03.020
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Young's modulus and hardness were determined by depth sensing indentation in plasma sprayed Al2O3-13% TiO2 nanocoatings. Results were compared to conventional coatings and the relevance of the nanostructure was analyzed. An indentation size effect was observed. Data provided by indentation tests at different maximum loads were used to estimate size-independent hardness and elastic modulus. Enhanced properties were observed in the nanostructured coating compared to the conventional one. Partially melted zones in the nanocoating, which act as reinforcements in the ceramic matrix composite, are likely responsible for the enhancement. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：3148 / 3156
页数：9
相关论文
共 50 条
  • [21] Laser remelting of plasma-sprayed conventional and nanostructured Al2O3-13 wt.%TiO2 coatings on titanium alloy
    Li, Chonggui
    Wang, You
    Guo, Lixin
    He, Junqi
    Pan, Zhaoyi
    Wang, Liang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 506 (01) : 356 - 363
  • [22] Solid Particle Erosion Behaviour of Plasma-Sprayed Conventional and Nanostructured Al2O3-13 wt% TiO2 Ceramic Coatings
    Wang, Dongsheng
    Tian, Zongjun
    Wang, Songlin
    Shen, Lida
    Huang, Yinhui
    TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY, 2015, 74 (02) : 90 - 96
  • [23] Wear resistance of plasma-sprayed Al2O3-TiO2 nanocoatings
    Ahn, Jeehoon
    Song, Eun Pil
    Lee, Sunghak
    Kim, Nack J.
    MECHANICAL BEHAVIOR OF MATERIALS X, PTS 1AND 2, 2007, 345-346 : 641 - +
  • [24] Protection Performance of Plasma Sprayed Al2O3-13 wt%TiO2 Coating Sealed with an Organic-inorganic Hybrid Agent
    Kaicheng Zhang
    Zehua Zhou
    Yong Deng
    Guangyu Wang
    Zehua Wang
    Lintao Wu
    Guangheng Yang
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2022, 37 : 331 - 335
  • [25] Thermal-shock resistance of plasma sprayed Al2O3-13 wt%TiO2 coating evaluated by residual strength method
    Wang, Miqi
    Zhou, Zehua
    Yi, Yu
    Wang, Zehua
    SURFACE & COATINGS TECHNOLOGY, 2019, 375 : 888 - 893
  • [26] Characterization of D-gun sprayed Al2O3-13%TiO2 and Al2O3-40%TiO2 coatings on ASTM 316 boiler steel and their microstructure
    Brar, Shehbaaz Singh
    Brar, Gurbhinder Singh
    Chawla, Vikas
    MATERIALS TODAY-PROCEEDINGS, 2022, 50 : 2299 - 2306
  • [27] Particles creating plasma sprayed Al2O3+13%TiO2 coating
    Palka, V
    Postrkova, E
    Kolenciak, V
    KOVOVE MATERIALY-METALLIC MATERIALS, 1996, 34 (06): : 367 - 375
  • [28] Protection Performance of Plasma Sprayed Al2O3-13 wt%TiO2 Coating Sealed with an Organic-inorganic Hybrid Agent
    Zhang Kaicheng
    Zhou Zehua
    Deng Yong
    Wang Guangyu
    Wang Zehua
    Wu Lintao
    Yang Guangheng
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2022, 37 (03): : 331 - 335
  • [29] Microstructural Characteristics and Wear Performance of Plasma Sprayed Al2O3-13 wt. % TiO2 Coating on the Surface of Extrusion Wheel
    ZHANG Xue-fei
    REN Li-min
    International Journal of Plant Engineering and Management, 2013, 18 (03) : 165 - 172
  • [30] Optimization of plasma spray parameters on the mechanical properties of agglomerated Al2O3-13%TiO2 coated mild steel
    Yusoff, N. H. N.
    Ghazali, M. J.
    Isa, M. C.
    Daud, A. R.
    Muchtar, A.
    Forghani, S. M.
    MATERIALS & DESIGN, 2012, 39 : 504 - 508
12345