Optimization of Permanent Magnet Motor Air-gap Flux Density Based on the Non-uniform Air Gap

被引:0
|
作者
Liu, Mingji [1 ]
Pei, Yawei [2 ]
Han, Zhi [1 ]
Shi, Pengfei [1 ]
机构
[1] North China Elect Power Univ, Sch Elect & Elect Engn, Beijing, Peoples R China
[2] CSR Zhuzhou Elect Co Ltd, Zhuzhou, Hunan, Peoples R China
关键词
permanent magnet motor; non-uniform air gap; Taguchi method; magnetic pole shape optimization; time-stepping FEM;
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
In order to reduce the negative effects of permanent magnet motor performance caused by excessive harmonic content in air-gap magnetic field, the optimal design of permanent magnet motor based on the Taguchi method and time-stepping FEM with built-in "V" type rotor magnetic circuit structure was proposed in this paper. Firstly, taking four structural parameters of permanent magnet motor as optimization variables and two characteristics of motor as constraint, the multi-objective multivariate optimization of the permanent magnet rotor with the structure of non-uniform air gap was carried out and the optimum rotor structure with the appropriate no-load air gap flux density waveform is obtained. Then the advantage and the accuracy of the optimized results with Taguchi method were verified by comparing the air gap flux density harmonic content before and after the optimization. Finally, the electromotive force waveform considering the stator skewed slots was calculated with time-stepping FEM to verify the effectiveness of the air-gap flux density optimization further.
引用
收藏
页码:3422 / 3426
页数:5
相关论文
共 50 条
  • [41] The sinusoidal air-gap magnetic field design of axial flux permanent magnet synchronous motors
    Zhang, CS
    Fan, Y
    Li, GG
    Chu, HY
    ICEMS 2005: PROCEEDINGS OF THE EIGHTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS, VOLS 1-3, 2005, : 340 - 343
  • [42] Design of a lightweight toroidal flux-switching permanent magnet machine with large air-gap
    Lindner, Andreas
    Hahn, Ingo
    2015 IEEE WORKSHOP ON ELECTRICAL MACHINES DESIGN, CONTROL AND DIAGNOSIS (WEMDCD), 2015, : 53 - 59
  • [43] Comparative Study of Air-Gap Field Modulation in Flux Reversal and Vernier Permanent Magnet Machines
    Li, Hua-Yang
    Liu, Y.
    Zhu, Z. Q.
    IEEE TRANSACTIONS ON MAGNETICS, 2018, 54 (11)
  • [44] Air-Gap and Yoke Flux Density Optimization for Multiphase Induction Motor Based on Novel Harmonic Current Injection Method
    Kong, Wubin
    Qu, Ronghai
    Huang, Jin
    Kang, Min
    2016 XXII INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2016, : 100 - 106
  • [45] Air-Gap and Yoke Flux Density Optimization for Multiphase Induction Motor Based on Novel Harmonic Current Injection Method
    Kong, Wubin
    Qu, Ronghai
    Kang, Min
    Huang, Jin
    Jing, Libing
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2017, 53 (03) : 2140 - 2148
  • [46] Analytical Method for Predicting the Air-Gap Flux Density of Dual-Rotor Permanent-Magnet (DRPM) Machine
    Xie, W.
    Dajaku, G.
    Gerling, D.
    2012 XXTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2012, : 2766 - 2771
  • [47] Uniform Demagnetization Fault Diagnosis for PMSM Based on Radial Air-gap Flux Density and Stator Current
    Ding S.
    He W.
    Hang J.
    Tang D.
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2024, 44 (01): : 332 - 340
  • [48] Research on Air-gap Field Modulation Effect of Torque Enhanced Hybrid Permanent Magnet Motor
    Chen, Yunyun
    Zhou, Xin
    Lu, Mingjie
    Xu, Yushan
    2024 IEEE INTERNATIONAL MAGNETIC CONFERENCE-SHORT PAPERS, INTERMAG SHORT PAPERS, 2024,
  • [49] Loss Reduction of Dual Air-gap Surface-mounted Permanent Magnet Synchronous Motor
    Heidari, Reza
    Ahn, Jin-Woo
    Kang, Do-Hyun
    Jeong, Kwang-Il
    2022 25TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2022), 2022,
  • [50] Analytical calculation of no-load air-gap magnetic field of surface permanent magnet motor
    Wang, XH
    Wang, SH
    Li, QF
    Li, QF
    ICEMS 2003: PROCEEDINGS OF THE SIXTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS, VOLS 1 AND 2, 2003, : 809 - 812