A model for the injection boundary conditions in the context of 3D simulation of Diesel Spray: Methodology and validation

被引：26

作者：

Martinez, Lionel ^{[1
]}

Benkenida, Adlene ^{[1
]}

Cuenot, Benedicte ^{[2
]}

机构：

[1] Inst Francais Petr, F-92852 Rueil Malmaison, France

[2] CERFACS, F-31055 Toulouse 01, France

来源：

FUEL | 2010年 / 89卷 / 01期

关键词：

Boundary condition; Spray; Large Eddy Simulation (LES); Modelling; Diesel injection; LARGE-EDDY SIMULATION; NEAR-NOZZLE REGION; COMBUSTION; CAVITATION; EMISSIONS; BURNER; FLOWS;

D O I：

10.1016/j.fuel.2009.06.012

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

Downstream Inflow Turbulent Boundary Conditions (DITurBC) are presented for the Eulerian-Eulerian Large Eddy Simulation (LES) or Reynolds Average Navier-Stokes (RANS) simulation of Diesel Sprays. These boundary conditions initiate the spray physics close to the nozzle exit, which avoids the difficulties linked to the 3D simulation of cavitation, primary break-up and turbulence in the near-nozzle region. An injector model is combined with mass and axial momentum conservation equations to obtain mean profiles of velocity, volume fraction and droplet diameter at a given distance downstream from the nozzle exit. In order to take into account the unsteadiness of the flow, velocity fluctuations are added to the mean profile. These boundary conditions are assessed by comparison with existing data on injection velocity, spray angle and velocity profiles from numerous experiments. (c) 2009 Elsevier Ltd. All rights reserved.

引用

页码：219 / 228

页数：10

共 50 条

[41] Validation of a 3D macroscopic model for superconductors
Rubinacci, G
Villone, F
Zamboni, W
COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2005, 24 (02) : 546 - 557
[42] MODEL VALIDATION OF A 3D SIMULATION OF DISLOCATION DYNAMICS - DISCRETIZATION AND LINE TENSION EFFECTS
DEVINCRE, B
CONDAT, M
ACTA METALLURGICA ET MATERIALIA, 1992, 40 (10): : 2629 - 2637
[43] Simulation and Measurement Validation of a Finite-Length Cylindrical 3D UTD Model
Liu, Ruwei
Gong, Yi
Pollin, Sofie
Miao, Yang
IEEE OPEN JOURNAL OF ANTENNAS AND PROPAGATION, 2022, 3 : 848 - 859
[44] Development and validation of a 3D RBF-spectral model for coastal wave simulation
Raoult, Cecile
Benoit, Michel
Yates, Marissa L.
JOURNAL OF COMPUTATIONAL PHYSICS, 2019, 378 : 278 - 302
[45] Schlieren and Mie scattering techniques for the ECN "spray G" characterization and 3D CFD model validation
Piazzullo, Daniele
Costa, Michela
Allocca, Luigi
Montanaro, Alessandro
Rocco, Vittorio
INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 2018, 28 (02) : 498 - 515
[46] The development and application of an automatic boundary segmentation methodology to evaluate the vaporizing characteristics of diesel spray under engine-like conditions
Ma, Y. J.
Huang, R. H.
Deng, P.
Huang, S.
MEASUREMENT SCIENCE AND TECHNOLOGY, 2015, 26 (04)
[47] Methodology for 3D Femur approximate model generation
Milojevic, Zoran
Navalusic, Slobodan
Milankov, Miroslav
Obradovic, Ratko
Desnica, Eleonora
Harhai, Vladimir
HEALTHMED, 2011, 5 (05): : 1211 - 1217
[48] The extended phenomenological spray model (EPSM): A new approach for CFD diesel fuel spray simulation under evaporative and nonevaporative conditions
Badami, M.
Millo, F.
Pinzello, A.
ATOMIZATION AND SPRAYS, 2008, 18 (08) : 669 - 697
[49] The extended phenomenological spray model (EPSM): A new approach for CFD diesel fuel spray simulation under evaporative and nonevaporative conditions
Dipartimento di Energetica, Politecnico di Torino, 10129 Torino, Italy
Atomiz. Sprays, 2008, 8 (669-697):
[50] Innovative Joystick Virtual Prototype Ergonomy Validation Methodology By Physical 3d Printed Functional Model
Todorov, Georgi
Sofronov, Yavor
Petkov, Angel
2018 INTERNATIONAL CONFERENCE ON HIGH TECHNOLOGY FOR SUSTAINABLE DEVELOPMENT (HITECH), 2018,

← 1 2 3 4 5 →