Theoretical analysis on pressure drop across porous cryocooler regenerator in evaluating the optimum regenerator porosity

被引：3

作者：

Srinivasan, K. V. ^{[1
,2
]}

Manimaran, A. ^{[2
]}

Arulprakasajothi, M. ^{[2
]}

Pokale, Rahul D. ^{[3
]}

Arolkar, Vijay A. ^{[1
]}

机构：

[1] Tata Inst Fundamental Res, Low Temp Facil, Mumbai, Maharashtra, India

[2] Veltech Rangarajan Dr Sagunthala R&D Inst Sci & T, Sch Mech Engn, Chennai, Tamil Nadu, India

[3] MCTs Rajiv Gandhi Inst Technol, Dept Mech Engn, Mumbai, Maharashtra, India

来源：

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS | 2022年 / 44卷 / 01期

关键词：

Porosity; pressure drop; regenerator; simulation; HYDRODYNAMIC PARAMETERS; FLOW; STEADY; PULSE; TUBE;

D O I：

10.1080/15567036.2019.1649321

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

The regenerator used in Stirling cryocoolers is the crucial component, which has a flow conduit through the porous matrix material. Various parameters affect the performance of the regenerator, of which pressure drop is the main parameter needs detailed analysis. Theoretical analysis of pressure drop across the length of Stirling cryocooler regenerator has been carried out at various mass flow rates (ranging from 0.4 g/s to 1.2 g/s) and at various charge pressures (ranging from 18 to 24 bar), using ANSYS 16.0 Computational Fluid Dynamics (CFD) and REGEN 3.3 numerical program for Regenerators. The paper mainly focuses on the pressure drop analysis of porous cryocooler regenerator in evaluating the optimized porosity value for the regenerator.

引用

页码：2045 / 2060

页数：16

共 50 条

[31] Theoretical and experimental investigation of pressure drop and refrigeration effect in pulse tube cryocooler
Badgujar, A. D.
Atrey, M. D.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2016, 230 (11) : 1910 - 1920
[32] Optimal Porosity Distribution for Minimized Ohmic Drop across a Porous Electrode
Ramadesigan, Venkatasailanathan
Methekar, Ravi N.
Latinwo, Folarin
Braatz, Richard D.
Subramanian, Venkat R.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2010, 157 (12) : A1328 - A1334
[33] A theoretical approach to pressure drop across cyclone separators
Zhao, B
CHEMICAL ENGINEERING & TECHNOLOGY, 2004, 27 (10) : 1105 - 1108
[34] Experimental and theoretical analysis of heat and mass transfer in a packed column dehumidifier/regenerator with liquid desiccant
Longo, GA
Gasparella, A
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2005, 48 (25-26) : 5240 - 5254
[35] Analysis on the heat transfer characteristics of a micro-channel type porous-sheets Stirling regenerator
Li, Zhigang
Haramura, Yoshihiko
Tang, Dawei
Guo, Chaohong
International Journal of Thermal Sciences, 2015, 94 : 37 - 49
[36] Theoretical analysis of the all-fiberized, dispersion-managed regenerator for simultaneous processing of WDM channels
Kouloumentas, Christos
OPTICS COMMUNICATIONS, 2011, 284 (19) : 4340 - 4349
[37] Analysis on the heat transfer characteristics of a micro-channel type porous-sheets Stirling regenerator
Li, Zhigang
Haramura, Yoshihiko
Tang, Dawei
Guo, Chaohong
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2015, 94 : 37 - 49
[38] The Effects of Porosity and Inclination on the Pressure Drop across Porous Screens and Honeycombs Used for Heat Exchanger Simulations in Wind Tunnel Studies
Gerova, Klementina
Velikov, Stefan
Garry, Kevin P.
SAE INTERNATIONAL JOURNAL OF PASSENGER CARS-MECHANICAL SYSTEMS, 2013, 6 (02): : 483 - 494
[39] Usefulness analysis on regenerator and heat exchanger in Brayton & inverse Brayton cycles at moderate pressure ratio operation
Goodarzi, M.
ENERGY CONVERSION AND MANAGEMENT, 2016, 126 : 982 - 990
[40] Theoretical and experimental investigations on the three-stage Stirling-type pulse tube cryocooler using cryogenic phase-shifting approach and mixed regenerator matrices
Dang, Haizheng
Bao, Dingli
Zhang, Tao
Tan, Jun
Zha, Rui
Li, Jiaqi
Li, Ning
Zhao, Yongjiang
Zhao, Bangjian
CRYOGENICS, 2018, 93 : 7 - 16

← 1 2 3 4 5 →