Theoretical analysis on pressure drop across porous cryocooler regenerator in evaluating the optimum regenerator porosity

被引：3
|
作者：
Srinivasan, K. V. [1 ,2 ]
Manimaran, A. [2 ]
Arulprakasajothi, M. [2 ]
Pokale, Rahul D. [3 ]
Arolkar, Vijay A. [1 ]
机构：
[1] Tata Inst Fundamental Res, Low Temp Facil, Mumbai, Maharashtra, India
[2] Veltech Rangarajan Dr Sagunthala R&D Inst Sci & T, Sch Mech Engn, Chennai, Tamil Nadu, India
[3] MCTs Rajiv Gandhi Inst Technol, Dept Mech Engn, Mumbai, Maharashtra, India
来源：
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS | 2022年 / 44卷 / 01期
关键词：
Porosity; pressure drop; regenerator; simulation; HYDRODYNAMIC PARAMETERS; FLOW; STEADY; PULSE; TUBE;
D O I：
10.1080/15567036.2019.1649321
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
The regenerator used in Stirling cryocoolers is the crucial component, which has a flow conduit through the porous matrix material. Various parameters affect the performance of the regenerator, of which pressure drop is the main parameter needs detailed analysis. Theoretical analysis of pressure drop across the length of Stirling cryocooler regenerator has been carried out at various mass flow rates (ranging from 0.4 g/s to 1.2 g/s) and at various charge pressures (ranging from 18 to 24 bar), using ANSYS 16.0 Computational Fluid Dynamics (CFD) and REGEN 3.3 numerical program for Regenerators. The paper mainly focuses on the pressure drop analysis of porous cryocooler regenerator in evaluating the optimized porosity value for the regenerator.
引用
收藏
页码：2045 / 2060
页数：16
相关论文
共 50 条
  • [1] Effect of Porosity of the regenerator on the performance of a miniature Stirling cryocooler
    Garg, Shital Kumar
    Premachandran, B.
    Singh, Manmohan
    Sachdev, Sunil
    Sadana, Mukesh
    THERMAL SCIENCE AND ENGINEERING PROGRESS, 2020, 15
  • [2] Experimental investigation of axial pressure drop analysis on the additively manufactured porous regenerator
    Arulprakasajothi, M.
    Srinivasan, K., V
    Arolkar, Vijay A.
    Jaison, K. A.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2021,
  • [3] Numerical and Experimental Analysis of Additive Manufactured Porous Regenerator for Stirling Cryocooler
    Srinivasan, Kadayam Venkatraman
    Mahalingam, Arulprakasajothi
    Metla, Revanth
    PROCEEDINGS OF THE 2020 IEEE 10TH INTERNATIONAL CONFERENCE ON NANOMATERIALS: APPLICATIONS & PROPERTIES (NAP-2020), 2020,
  • [4] NUMERICAL MODELING OF POROUS NOZZLES FOR REGENERATOR OF STIRLING CRYOCOOLER
    Ivan, Arkharov
    Ekaterina, Navasardyan
    Alexey, Parkin
    Viktoriya, Kulik
    14TH CRYOGENICS 2017 IIR INTERNATIONAL CONFERENCE (CRYOGENICS 2017), 2017, : 255 - 262
  • [5] Design and development of porous regenerator for Stirling cryocooler using additive manufacturing
    Srinivasan, K., V
    Manimaran, A.
    Arulprakasajothi, M.
    Revanth, M.
    Arolkar, Vijay A.
    THERMAL SCIENCE AND ENGINEERING PROGRESS, 2019, 11 : 195 - 203
  • [6] Pressure drop analysis of oscillating flows through a miniature porous regenerator under isothermal and nonisothermal conditions
    Dellali, E.
    Begot, S.
    Lanzetta, F.
    Gavignet, E.
    Rauch, J. Y.
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2019, 103 : 394 - 405
  • [7] Numerical Study of Pressure Drop in Stirling Engine Regenerator
    Bitsikas, Panagiotis
    Rogdakis, Emmanouil
    Dogkas, George
    JOURNAL OF ENERGY ENGINEERING, 2020, 146 (04)
  • [8] Theoretical analysis of a pulse tube regenerator
    Roach, PR
    Kashani, A
    Lee, JM
    ADVANCES IN CRYOGENIC ENGINEERING, VOL 41, PTS A AND B, 1996, : 1357 - 1363
  • [9] Theoretical Analysis of a Pulse Tube Regenerator
    Adv Cryog Eng, 41/B (1357):
  • [10] Thermal analysis of a rotary regenerator with fixed pressure drop or fixed pumping power
    Mioralli, P. C.
    Ganzarolli, M. M.
    APPLIED THERMAL ENGINEERING, 2013, 52 (01) : 187 - 197
12345