INFLUENCE OF FEED SPEED ON MACHINED SURFACE QUALITY

被引：0

作者：

Cep, Robert ^{[1
]}

Petru, Jana ^{[1
]}

Zlamal, Tomas ^{[1
]}

Valicek, Jan ^{[1
]}

Harnicarova, Marta ^{[1
]}

Janasek, Adam ^{[1
]}

Cepova, Lenka ^{[1
]}

机构：

[1] Tech Univ Ostrava, Ostrava, Czech Republic

来源：

METAL 2013: 22ND INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS | 2013年

关键词：

Machining; Feed Rate; Surface Quality;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper deals with the influence of feed rate on the quality of the machined surface, especially surface roughness. The experiment was carried at cutting tool HURCO VMX t30 with respect to the following cutting parameters: cutting speeds 250; 350; 450; 550 and 850 m. min(-1), feed 0.1; 0.5 and 1.0 mm/tooth. Machining was performed by five-tooth cutter FF FW D50-22-05 and cutting inserts FF WOMT 060212 TM IC908 on the steel grade 1.2343 (19 552) and 1.1191 (12 050). The evaluated parameters were values Ra - arithmetical mean roughness deviation and Rz - the largest inequalities height profile [1, 2] in the transverse direction and the longitudinal direction of machining. As a result will be the structural equations which can describe the character depending on the cut surface roughness parameters.

引用

页码：1033 / 1038

页数：6

共 50 条

[21] Influence of Inclination Angle on Machined Surface Hardness in High Speed Ball End Milling
Han, Shiguo
Zhao, Jun
Chen, Xiaoxiao
Li, Yueen
Cao, Qingyuan
Dong, Yongwang
[J]. ADVANCES IN MATERIALS PROCESSING X, 2012, 500 : 134 - +
[22] A Comparative Analysis of the Machined Surfaces Quality of an Aluminum Alloy According to the Cutting Speed and Feed per Tooth Variations
Pop, Alina Bianca
Titu, Mihail Aurel
[J]. NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION II, 2020, 76 : 238 - 244
[23] Influence of feed speed for the cell molding quality of friction stitch welding
[J]. Gao, H. (gaohuiadam@bipt.edu.cn), 1600, Shanghai Jiaotong University (46):
[24] Influence of dynamic processes on the machined surface
Idrisova Y.V.
Kudoyarov R.G.
Fetsak S.I.
Maslov A.R.
[J]. Russian Engineering Research, 2015, 35 (12) : 887 - 891
[25] Influence of motion error of feed drive systems onto machined surface generated by ball end mill
Sato, Yuki
Sato, Ryuta
Shirase, Keiichi
[J]. JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2014, 8 (04):
[26] Transiting and acceleration/deceleration methods for feed-speed of machined path segments
Chen L.
Feng X.
[J]. Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery, 2010, 41 (01): : 200 - 204
[27] Characterization of machined surface quality and near-surface microstructure of a high speed thrust angular contact ball bearing
Wu, Di
Zhang, Xiao-Chen
Li, Yi-Feng
Wang, Jianqiu
Han, En-Hou
[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2021, 86 : 219 - 226
[28] Characterization of machined surface quality and near-surface microstructure of a high speed thrust angular contact ball bearing
Di Wu
Xiao-Chen Zhang
Yi-Feng Li
Jianqiu Wang
En-Hou Han
[J]. Journal of Materials Science & Technology, 2021, 86 (27) : 219 - 226
[29] Influence of the Feed on the Principle Quality and Accuracy Indicators at the Speed Processing of the Involutes Tooth
Mares, Gheorghe
[J]. ADVANCES IN MANUFACTURING ENGINEERING, QUALITY AND PRODUCTION SYSTEMS, VOL II, 2009, : 378 - 382
[30] SURFACE QUALITY OF ELECTROCHEMICALLY-MACHINED COMPONENTS
ISAEV, AI
[J]. RUSSIAN ENGINEERING JOURNAL-USSR, 1969, (07): : 69 - &

← 1 2 3 4 5 →