The performance of small diameter twist drills in deep-hole drilling

被引：26

作者：

Heinemann, Robert ^{[1
]}

Hinduja, Srichand

Barrow, George

Petuelli, Gerhard

机构：

[1] Univ Manchester, Sch Mech Aerosp & Civil Engn, Manchester M60 1QD, Lancs, England

[2] S Westphalia Univ Appl Sci, Dept Mech & Automat Engn, D-59497 Soest, Germany

来源：

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME | 2006年 / 128卷 / 04期

关键词：

deep-hole drilling; twist drills; swarf disposal; tool life; MQL;

D O I：

10.1115/1.2335859

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper investigates the performance of small diameter high-speed steel twist drills drilling boreholes with a depth of ten times the diameter into carbon steel AISI 1045 using minimum quantity lubrication. The performance of small twist drills is determined, first, by their deep-hole drilling capability, i.e., in how far the cutting forces can be kept at a noncritical level by maintaining the chip disposal, and, second, by their tool life. This work shows that both the deep-hole drilling capability and tool life of small drills are strongly dependent on their geometry, in particular the size of the chip flutes, and the flute surface topography.

引用

页码：884 / 892

页数：9

共 50 条

[41] Effect of tool coatings on the performance of small-diameter drills in drilling deep holes with higher cutting speed
Heinemann, R.
Hinduja, S.
[J]. PROCEEDINGS OF THE 35TH INTERNATIONAL MATADOR CONFERENCE: FORMERLY THE INTERNATIONAL MACHINE TOOL DESIGN AND RESEARCH CONFERENCE, 2007, : 187 - +
[42] Skill training of manual machine operation by simulator. In the case of small-diameter deep-hole machining with drilling machine
[J]. Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 1997, 63 (04): : 555 - 559
[43] Eigensolution of a BTA deep-hole drilling shaft system
Ma, Guo-hong
Shen, Xing-quan
[J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2018, 32 (04) : 1499 - 1504
[44] Study of the burr height at hole exit in bone drilling by twist drills
Song, Shaokang
Cheng, Xiang
Shi, Ming
Zheng, Guangming
Dong, Ruichun
Mu, Zonggao
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2022, 236 (11) : 1654 - 1661
[45] AUTOMATIC-CONTROL OF DEEP-HOLE DRILLING PROCESS
KONADOR, JG
KWIATKOWSKI, B
[J]. MECHANIK MIESIECZNIK NAUKOWO-TECHNICZNY, 1978, 51 (07): : 352 - 353
[46] DEEP-HOLE DRILLING AND BORING - LATHE STYLE.
Anon
[J]. Tooling & Production, 1979, 44 (11):
[47] Eigensolution of a BTA deep-hole drilling shaft system
Guo-hong Ma
Xing-quan Shen
[J]. Journal of Mechanical Science and Technology, 2018, 32 : 1499 - 1504
[48] SIMULATION OF SPINNING OSCILLATIONS OF DEEP-HOLE DRILLING COLUMNS
Gaydaychuk, V. V.
Shevchuk, L., V
[J]. OPIR MATERIALIV I TEORIA SPORUD-STRENGTH OF MATERIALS AND THEORY OF STRUCTURES, 2012, (89): : 68 - 77
[49] A study on titanium alloys deep-hole drilling technique
Zhu, Lin
Wang, Jiangping
[J]. ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY II, 2006, 532-533 : 945 - +
[50] THE STUDY OF SURFACE ROUGNESS IN DEEP-HOLE DRILLING PROCESSES
Lukic, L. J.
Djapic, M.
[J]. JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, 2013, 19 (02): : 221 - 229

← 1 2 3 4 5 →