Lateral-torsional buckling behavior of hot-rolled steel beams with flange upstands

The lateral-torsional buckling behavior of hot-rolled steel beams has been studied extensively. Much of the research carried out has been limited to doubly symmetric beams and a few other common geometries. The study of monosymmetric and non-symmetric geometries has not been as extensive. This paper presents a study of the lateral-torsional buckling behavior of monosymmetric beams having the monosymmetry introduced by flange end upstands. The study is carried out using finite element modelling. The behavior is investigated for various spans and with various heights of upstands. It is observed that the upstands increase the critical buckling moment of the section but that this increase diminishes with increase in upstand height. It is further observed that this unique behavior could be influenced by a movement in the relative position of the shear center to the geometric centroid as the flange upstands are adjusted. In addition there exists for these geometries unique points where the monosymmetric sections have properties typically associated with doubly symmetric sections. It is shown that the relative position of the shear center and centroid have some influence on the strength gain pattern observed. (C) 2018 Elsevier Ltd. All rights reserved.