Characterization of Inkjet Printed Electrodes with Improved Porosity

被引：5
|
作者：
Shukla, S. [1 ,2 ]
Stanier, D. [1 ]
Saha, M. S. [2 ]
Zahiri, B. [2 ]
Tam, M. [2 ]
Stumper, J. [2 ]
Secanell, M. [1 ]
机构：
[1] Univ Alberta, Dept Mech Engn, Edmonton, AB, Canada
[2] AFCC, Burnaby, BC, Canada
来源：
SELECTED PROCEEDINGS FROM THE 231ST ECS MEETING | 2017年 / 77卷 / 11期
基金：
加拿大自然科学与工程研究理事会;
关键词：
FUEL-CELL ELECTRODES; PERFORMANCE;
D O I：
10.1149/07711.1453ecst
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
Propylene glycol was used as an additive to enhance the porosity and performance of catalyst layers (CL) fabricated using inkjet printing. Compared to the previously used additive, ethylene glycol based ink, the modified recipe helped in improving the CL porosity by 10 - 20% and the in-situ performance by 50-100 mV at high current densities. The performance for PG based CLs was found to increase with decreasing ionomer/carbon (I/C) ratio, with I/C ratio of 0.5 showing the best performance. A setup based on Archimedes principle is used to measure the CL porosity, that is based on weighing the sample in n-octane and deionized water to determine the solid and bulk volumes respectively. Overall, the work improves on the previously reported inkjet printed CL performance and addresses the concern of low porosity by modifying the ink recipe.
引用
收藏
页码：1453 / 1463
页数：11
相关论文
共 50 条
  • [21] Inkjet printed Electrodes for Determination of Sulfur Dioxide and Ascorbic Acid in Wine
    Schneider, Marion
    Tuerke, Alexander
    Fischer, Wolf-Joachim
    Kilmartin, Paul A.
    2013 IEEE SENSORS, 2013, : 940 - 943
  • [22] Inkjet printed multiwall carbon nanotube electrodes for dielectric elastomer actuators
    Baechler, Curdin
    Gardin, Samuele
    Abuhimd, Hatem
    Kovacs, Gabor
    SMART MATERIALS AND STRUCTURES, 2016, 25 (05)
  • [23] Inkjet Printed Fractal-Connected Electrodes with Silver Nanoparticle Ink
    Vaseem, Mohammad
    Lee, Kil Mok
    Hong, A-Ra
    Hahn, Yoon-Bong
    ACS APPLIED MATERIALS & INTERFACES, 2012, 4 (06) : 3300 - 3307
  • [24] Profile Control of Inkjet Printed Silver Electrodes and Their Application to Organic Transistors
    Fukuda, Kenjiro
    Sekine, Tomohito
    Kumaki, Daisuke
    Tokito, Shizuo
    ACS APPLIED MATERIALS & INTERFACES, 2013, 5 (09) : 3916 - 3920
  • [25] P(VDF-TrFE-CTFE) Actuators with Inkjet Printed Electrodes
    Baelz, K. Keith
    Hunt, Andres
    2019 IEEE 7TH INTERNATIONAL CONFERENCE ON CONTROL, MECHATRONICS AND AUTOMATION (ICCMA 2019), 2019, : 327 - 332
  • [26] Flexible electroluminescent device with inkjet-printed carbon nanotube electrodes
    Azoubel, Suzanna
    Shemesh, Shay
    Magdassi, Shlomo
    NANOTECHNOLOGY, 2012, 23 (34)
  • [27] Inkjet Printed Silver Electrodes for Organic Thin-Film Transistors
    Wu, Yiliang
    DIGITAL FABRICATION 2011/ NIP27- 27TH INTERNATIONAL CONFERENCE ON DIGITAL PRINTING TECHNOLOGIES: TECHNICAL PROGRAMS AND PROCEEDINGS, 2011, 2011, : 441 - 444
  • [28] Rapid Fabrication of Electro-Adhesive Devices With Inkjet Printed Electrodes
    Berdozzi, Nicolo
    Chen, Yi
    Luzi, Luca
    Fontana, Marco
    Fassi, Irene
    Tosatti, Lorenzo Molinari
    Vertechy, Rocco
    IEEE ROBOTICS AND AUTOMATION LETTERS, 2020, 5 (02): : 2770 - 2776
  • [29] Characterization of silver nanoparticle based inkjet printed lines
    Eric Fribourg-Blanc
    Dung My Thi Dang
    Chien Mau Dang
    Microsystem Technologies, 2013, 19 : 1961 - 1971
  • [30] Characterization of Inkjet-Printed Digital Microfluidics Devices
    Chen, Shiyu
    He, Zhidong
    Choi, Suhwan
    Novosselov, Igor V.
    SENSORS, 2021, 21 (09)
12345