Characterization of Inkjet Printed Electrodes with Improved Porosity

被引：5
|
作者：
Shukla, S. [1 ,2 ]
Stanier, D. [1 ]
Saha, M. S. [2 ]
Zahiri, B. [2 ]
Tam, M. [2 ]
Stumper, J. [2 ]
Secanell, M. [1 ]
机构：
[1] Univ Alberta, Dept Mech Engn, Edmonton, AB, Canada
[2] AFCC, Burnaby, BC, Canada
来源：
SELECTED PROCEEDINGS FROM THE 231ST ECS MEETING | 2017年 / 77卷 / 11期
基金：
加拿大自然科学与工程研究理事会;
关键词：
FUEL-CELL ELECTRODES; PERFORMANCE;
D O I：
10.1149/07711.1453ecst
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
Propylene glycol was used as an additive to enhance the porosity and performance of catalyst layers (CL) fabricated using inkjet printing. Compared to the previously used additive, ethylene glycol based ink, the modified recipe helped in improving the CL porosity by 10 - 20% and the in-situ performance by 50-100 mV at high current densities. The performance for PG based CLs was found to increase with decreasing ionomer/carbon (I/C) ratio, with I/C ratio of 0.5 showing the best performance. A setup based on Archimedes principle is used to measure the CL porosity, that is based on weighing the sample in n-octane and deionized water to determine the solid and bulk volumes respectively. Overall, the work improves on the previously reported inkjet printed CL performance and addresses the concern of low porosity by modifying the ink recipe.
引用
收藏
页码：1453 / 1463
页数：11
相关论文
共 50 条
  • [1] Fabrication and Characterization of Inkjet Printed Flexible Dry ECG Electrodes
    Momota, Mst Moriom Rojy
    Morshed, Bashir I.
    Ferdous, Tamanna
    Fujiwara, Tomoko
    IEEE SENSORS JOURNAL, 2023, 23 (07) : 7917 - 7928
  • [2] Inkjet-Printed Gold Electrodes on Paper: Characterization and Functionalization
    Maattanen, Anni
    Ihalainen, Petri
    Pulkkinen, Petri
    Wang, Shaoxia
    Tenhu, Heikki
    Peltonen, Jouko
    ACS APPLIED MATERIALS & INTERFACES, 2012, 4 (02) : 955 - 964
  • [3] Inkjet Printed Electrodes in Thin Film Transistors
    Tao, Ruiqiang
    Ning, Honglong
    Chen, Jianqiu
    Zou, Jianhua
    Fang, Zhiqiang
    Yang, Caigui
    Zhou, Yicong
    Zhang, Jianhua
    Yao, Rihui
    Peng, Junbiao
    IEEE JOURNAL OF THE ELECTRON DEVICES SOCIETY, 2018, 6 (01): : 774 - 790
  • [4] Inkjet printed flexible electrodes for surface electromyography
    Scalisi, R. G.
    Paleari, M.
    Favetto, A.
    Stoppa, M.
    Ariano, P.
    Pandolfi, P.
    Chiolerio, A.
    ORGANIC ELECTRONICS, 2015, 18 : 89 - 94
  • [5] Inkjet and Extrusion Printed Silver Biomedical Tattoo Electrodes
    El-Hajj, Yoland
    Ghalamboran, Milad
    Grau, Gerd
    2022 IEEE INTERNATIONAL CONFERENCE ON FLEXIBLE AND PRINTABLE SENSORS AND SYSTEMS (IEEE FLEPS 2022), 2022,
  • [6] INKJET PRINTED STRETCHABLE ELECTRODES FOR TUNABLE FOCUS LENS
    Shrestha, Milan
    La, Thanh-Giang
    Lau, Gih Keong
    PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING (PRO-AM 2016), 2016, : 103 - 108
  • [7] Analysis of Inkjet Printed Polymer Electrolyte Electrolyzer Electrodes
    Mandal, M.
    Valls, A.
    Gangnus, N.
    Secanell, M.
    POLYMER ELECTROLYTE FUEL CELLS 17 (PEFC 17), 2017, 80 (08): : 1085 - 1095
  • [8] Printed Fuel Cell Electrodes with Engineered Porosity
    Khatri-Chhetri, Prasanna
    Cormier, Denis
    Chen, Fanglin
    Majumdar, Prasun
    DIGITAL FABRICATION 2011/ NIP27- 27TH INTERNATIONAL CONFERENCE ON DIGITAL PRINTING TECHNOLOGIES: TECHNICAL PROGRAMS AND PROCEEDINGS, 2011, 2011, : 645 - 650
  • [9] Inkjet-printed transparent electrodes: Design, characterization, and initial in vivo evaluation for brain stimulation
    Matta, Rita
    Reato, Davide
    Lombardini, Alberto
    Moreau, David
    O'Connor, Rodney P.
    PLOS ONE, 2025, 20 (04):
  • [10] Silver nanoparticle conductive inks: synthesis, characterization, and fabrication of inkjet-printed flexible electrodes
    Iara J. Fernandes
    Angélica F. Aroche
    Ariadna Schuck
    Paola Lamberty
    Celso R. Peter
    Willyan Hasenkamp
    Tatiana L. A. C. Rocha
    Scientific Reports, 10
12345