Effects of ferrite catalyst concentration and water vapor on growth of vertically aligned carbon nanotube

In this study Fe3O4 nanoparticles were used as catalysts for the growth of vertically aligned carbon nanotubes (VA-CNTs) by chemical vapor deposition (CVD). The effect of catalyst concentration and water vapor during the CVD process on the properties of the VA-CNTs was investigated. Monodisperse Fe3O4 nanoparticles (4.5-9.0 nm diameter) prepared by thermal decomposition of iron acetylacetonate compounds were spin-coated on clean silicon substrates which served as a platform for VA-CNTs growth. The results indicated that the length, density and growth rate of CNTs were strongly affected by the catalyst concentration. CNTs grown at 0.026 g ml(-1) Fe3O4 catalyst had greater length, density and growth rates than those obtained at 0.01 and 0.033 g ml(-1) Fe3O4 catalyst. Addition of water during the CVD process had drastically improved CNTs growth. The length and growth rate of obtained CNTs were 40 mu m and 1.33 mu m min(-1), respectively. The results provided insights into the role of Fe3O4 catalyst and water vapor during VA-CNTs growth process by CVD method and the obtained information might serve as a starting point for further optimization of VA-CNTs synthesis.