Simultaneous determination of nickel, iron, and copper in margarine by inductively coupled plasma-atomic emission spectroscopy after sample emulsification

Nickel, iron, and copper were determined in margarine samples by using emulsification followed by inductively coupled plasma-atomic emission spectroscopy. Sample treatment and instrumental conditions were optimized, and the results were compared with those obtained by a pseudodigestion method in order to evaluate the compatibility of both methodologies. The optimum amount of margarine in the emulsion was 35% when the surfactant Tween 80 was added as the emulsifier. Copper was below the detection limits of both methodologies, i.e., digestion and emulsion; iron and nickel concentrations found by both methodologies were similar. The detection limits of the emulsion method were 0.002, 0.015, and 0.092 mg/kg for copper, iron, and nickel, respectively. A benefit of the emulsion method is that laborious and lengthy sample digestion procedures are avoided. In addition, accurate and precise results are obtained. Recoveries with the emulsion method ranged from 101 to 104%, with relative standard deviations of less than or equal to6 %.