Renewable energy called normal-butanol is a possible alternative fuel for automobile vehicles like some other possible fuel such as compressed natural gas (CNG), liquid petroleum gas (LPG), ethanol, and methanol. Bio-butanol or normal-butanol is also a meritable energy source to substitute for regular fossil fuels. The normal-butanol has recently started to use as a possible substitute fuel to regular fuels for internal combustion engines to attain eco-friendly and capital benefits. As compared to regular energy sources in internal combustion engines, normal-butanol has some benefits, so it shows the potential to decrease tailpipe emission and an increase in positive network delivery. The current work carried out to investigate the performance and emission characteristics of dual spark plug ignition engine fuelled with normal-butanol as additive fuel by adopting 10:1 and 10.5:1 compression ratios. The experimental results reveal that when compared between 10:1 and 10.5:1 compression ratios, brake power (BP) is increased by 3.5 % and 3.2 % for normal-Butanol 35 (nB35) blend and energy efficiency increased by 2.72 % and 2.14 % for nB35 blend at a part and full load for 10.5:1 compression ratio. The n-butanol create a greater impact on tailpipe emissions that the carbon monoxide (CO) decreased by 32 %, 29 %, and hydrocarbon (HC) reduced by 2.38 % and 2.22 % for nB35 blend at a part and full load condition respectively. The experimental results on dual spark ignition engine using n-butanol as additive fuel by varying compression ratio reveals that n-butanol can be a suitable replacement energy source for the automobile sector in the nearest future.
机构:
School of Mechanical and Electrical Engineering, University of Southern Queensland, Toowoomba,QLD, Australia
Department of Mechanical, College of Engineering, University of Al-Qadisiyah, Al-Diwaniyah, IraqSchool of Mechanical and Electrical Engineering, University of Southern Queensland, Toowoomba,QLD, Australia
Jabbar Murad Algayyim, Sattar
Wandel, Andrew P.
论文数: 0引用数: 0
h-index: 0
机构:
School of Mechanical and Electrical Engineering, University of Southern Queensland, Toowoomba,QLD, AustraliaSchool of Mechanical and Electrical Engineering, University of Southern Queensland, Toowoomba,QLD, Australia
Wandel, Andrew P.
Yusaf, Talal
论文数: 0引用数: 0
h-index: 0
机构:
School of Mechanical and Electrical Engineering, University of Southern Queensland, Toowoomba,QLD, AustraliaSchool of Mechanical and Electrical Engineering, University of Southern Queensland, Toowoomba,QLD, Australia
机构:
Changan Univ, Key Lab Shaanxi Prov Dev & Applicat New Transporta, Xian, Peoples R ChinaChangan Univ, Key Lab Shaanxi Prov Dev & Applicat New Transporta, Xian, Peoples R China
Yang, Ke
Zhang, Chunhua
论文数: 0引用数: 0
h-index: 0
机构:
Changan Univ, Key Lab Shaanxi Prov Dev & Applicat New Transporta, Xian, Peoples R China
Changan Univ, Key Lab Shaanxi Prov Dev & Applicat New Transporta, Xian 710064, Peoples R ChinaChangan Univ, Key Lab Shaanxi Prov Dev & Applicat New Transporta, Xian, Peoples R China
Zhang, Chunhua
Lu, An
论文数: 0引用数: 0
h-index: 0
机构:
Changan Univ, Key Lab Shaanxi Prov Dev & Applicat New Transporta, Xian, Peoples R ChinaChangan Univ, Key Lab Shaanxi Prov Dev & Applicat New Transporta, Xian, Peoples R China
Lu, An
Kang, Yujia
论文数: 0引用数: 0
h-index: 0
机构:
Changan Univ, Key Lab Shaanxi Prov Dev & Applicat New Transporta, Xian, Peoples R ChinaChangan Univ, Key Lab Shaanxi Prov Dev & Applicat New Transporta, Xian, Peoples R China
Kang, Yujia
Yu, Xiaowen
论文数: 0引用数: 0
h-index: 0
机构:
Changan Univ, Key Lab Shaanxi Prov Dev & Applicat New Transporta, Xian, Peoples R ChinaChangan Univ, Key Lab Shaanxi Prov Dev & Applicat New Transporta, Xian, Peoples R China
Yu, Xiaowen
Wang, Hanwen
论文数: 0引用数: 0
h-index: 0
机构:
Changan Univ, Key Lab Shaanxi Prov Dev & Applicat New Transporta, Xian, Peoples R ChinaChangan Univ, Key Lab Shaanxi Prov Dev & Applicat New Transporta, Xian, Peoples R China