Assessment of UMTS and averaged SED fracture criteria for U-notched specimens

被引：0

作者：

Filipescu, Hannelore ^{[1
]}

Caplescu, Cristiana ^{[1
]}

Pasca, Niculai ^{[1
]}

机构：

[1] Politehn Univ Timisoara, Timisoara 300006, Romania

来源：

ADVANCES IN FRACTURE AND DAMAGE MECHANICS XII | 2014年 / 577-578卷

关键词：

notch fracture; UMTS and averaged SED criteria; polyurethane; STRAIN-ENERGY; FAILURE;

D O I：

10.4028/www.scientific.net/KEM.577-578.113

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A set of mixed-mode I/II fracture tests was carried out on a polyurethane material. Using a single edge notched bend (SENB) type specimen, containing straight and respectively inclined U notches, the full range from pure mode I to dominant mode II was achieved. Two different fracture criteria were employed for the prediction of the fracture conditions: the UMTS criterion and the averaged SED criterion. Using these two criteria a set of curves were derived in terms of the fracture load vs. notch radius. The agreement between the experimental results and those predicted based on these two criteria is discussed finally.

引用

页码：113 / 116

页数：4

共 50 条

[31] Fracture assessment of U-notched diagonally loaded square plates additively manufactured from ABS with different raster orientations
Torabi, A. R.
Shahbaz, Sahel
Ayatollahi, M. R.
ENGINEERING STRUCTURES, 2023, 292
[32] Ductile Failure Prediction of U-Notched Bainitic Functionally Graded Steel Specimens Using the Equivalent Material Concept Combined with the Averaged Strain Energy Density Criterion
H. Salavati
H. Mohammadi
Physical Mesomechanics, 2019, 22 : 255 - 260
[33] Ductile Failure Prediction of U-Notched Bainitic Functionally Graded Steel Specimens Using the Equivalent Material Concept Combined with the Averaged Strain Energy Density Criterion
Salavati, H.
Mohammadi, H.
PHYSICAL MESOMECHANICS, 2019, 22 (03) : 255 - 260
[34] Application of the equivalent material concept to fracture of U-notched solids under small scale yielding
Gomez, F. J.
Torabi, A. R.
ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY, 2018, 13 : 267 - 272
[35] Evaluation of the ductile-brittle transition temperature of anisotropic materials by small punch test with un-notched and U-notched specimens
Guan, Kaishu
Wang, Duwei
Dobrovska, Jana
Matocha, Karel
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2019, 102 : 98 - 102
[36] A Fragile Points Method, with an interface debonding model, to simulate damage and fracture of U-notched structures
Wang, Kailei
Shen, Baoying
Li, Mingjing
Dong, Leiting
Atluri, Satya N.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2022, 123 (08) : 1736 - 1759
[37] Providing a virtual material for simple estimation of fracture in U-notched highly orthotropic specimens with nonlinear behavior under mixed mode I/II loading
Bagheri, Pedram
Torabi, A. R.
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2022, 121
[38] Fracture Load Predictions in Short Glass Fiber Reinforced Polyamide 6 U-Notched Specimens Combining the Equivalent Material Concept and the Theory of Critical Distances
Cicero, S.
Torabi, A. R.
Ibanez-Guderrez, F. T.
Azizi, P.
JOURNAL OF TESTING AND EVALUATION, 2020, 48 (02) : 1226 - 1251
[39] Study of estimation of ductile-brittle transition temperature using U-notched small punch test specimens
Wang, Wulin
Zhong, Jiru
Zhang, Xiaocheng
Jiang, Tao
Guan, Kaishu
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 108
[40] Experimental and theoretical investigation of mixed mode I/III brittle fracture of U-notched polystyrene components
Torabi, A. R.
Saboori, Behnam
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2018, 53 (01): : 15 - 25

← 1 2 3 4 5 →