Assessment of UMTS and averaged SED fracture criteria for U-notched specimens

被引：0
|
作者：
Filipescu, Hannelore [1 ]
Caplescu, Cristiana [1 ]
Pasca, Niculai [1 ]
机构：
[1] Politehn Univ Timisoara, Timisoara 300006, Romania
来源：
ADVANCES IN FRACTURE AND DAMAGE MECHANICS XII | 2014年 / 577-578卷
关键词：
notch fracture; UMTS and averaged SED criteria; polyurethane; STRAIN-ENERGY; FAILURE;
D O I：
10.4028/www.scientific.net/KEM.577-578.113
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A set of mixed-mode I/II fracture tests was carried out on a polyurethane material. Using a single edge notched bend (SENB) type specimen, containing straight and respectively inclined U notches, the full range from pure mode I to dominant mode II was achieved. Two different fracture criteria were employed for the prediction of the fracture conditions: the UMTS criterion and the averaged SED criterion. Using these two criteria a set of curves were derived in terms of the fracture load vs. notch radius. The agreement between the experimental results and those predicted based on these two criteria is discussed finally.
引用
收藏
页码：113 / 116
页数：4
相关论文
共 50 条
  • [1] Fracture assessment of U-notched graphite specimens by means of cohesive zone model
    Razavi, N.
    Majidi, H. R.
    Berto, F.
    Ayatollahi, M. R.
    1ST MEDITERRANEAN CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY (MEDFRACT1), 2020, 26 : 251 - 255
  • [2] Fracture assessment of graphite V-notched and U-notched specimens by using the cohesive crack model
    Cendon, D. A.
    Torabi, A. R.
    Elices, M.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2015, 38 (05) : 563 - 573
  • [3] Estimation of Mixed-Mode I/II Fracture of U-Notched Polycarbonate Specimens Using the TCD and SED Methods
    J. Albinmousa
    J. AlSadah
    M. A. Hawwa
    H. M. Al-Qahtani
    Physical Mesomechanics, 2023, 26 : 66 - 81
  • [4] Estimation of Mixed-Mode I/II Fracture of U-Notched Polycarbonate Specimens Using the TCD and SED Methods
    Albinmousa, J.
    AlSadah, J.
    Hawwa, M. A.
    Al-Qahtani, H. M.
    PHYSICAL MESOMECHANICS, 2023, 26 (01) : 66 - 81
  • [5] Geometry effects on mode I brittle fracture in U-notched specimens
    Bahadori, Robab
    Ayatollahi, Majid R.
    Razavi, Nima
    Berto, Filippo
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2021, 44 (04) : 901 - 915
  • [6] Mixed mode fracture assessment of U-notched graphite Brazilian disk specimens by means of the local energy
    Torabi, A. R.
    Berto, F.
    STRUCTURAL ENGINEERING AND MECHANICS, 2014, 50 (06) : 723 - 740
  • [7] Fracture Assessment of U-Notched Graphite Plates Under Tension
    A. R. Torabi
    International Journal of Fracture, 2013, 181 : 285 - 292
  • [8] Fracture Assessment of U-Notched Graphite Plates Under Tension
    Torabi, A. R.
    INTERNATIONAL JOURNAL OF FRACTURE, 2013, 181 (02) : 285 - 292
  • [9] Fracture Load Predictions in Additively Manufactured ABS U-Notched Specimens Using Average Strain Energy Density Criteria
    Sanchez, Marcos
    Cicero, Sergio
    Arrieta, Sergio
    Martinez, Victor
    MATERIALS, 2022, 15 (07)
  • [10] Fracture of U-notched specimens under mixed mode: Experimental results and numerical predictions
    Gomez, F. J.
    Elices, M.
    Berto, F.
    Lazzarin, P.
    ENGINEERING FRACTURE MECHANICS, 2009, 76 (02) : 236 - 249
12345