Enhancement of stretch formability of Mg-3Al-1Zn alloy sheet using hot rolling at high temperatures up to 823 K and subsequent warm rolling

被引：79

作者：

Huang, Xinsheng ^{[1
]}

Suzuki, Kazutaka ^{[1
]}

Saito, Naobumi ^{[1
]}

机构：

[1] Natl Inst Adv Ind Sci & Technol, Mat Res Inst Sustainable Dev, Nagoya, Aichi 4638560, Japan

来源：

SCRIPTA MATERIALIA | 2009年 / 61卷 / 04期

关键词：

Magnesium alloy; Differential speed rolling; Microstructure; Texture; Stretch formability; SOLID-SOLUTION ALLOYS; AZ31 MAGNESIUM ALLOY; ROOM-TEMPERATURE; TEXTURE; MG; MICROSTRUCTURES; BEHAVIOR; LI;

D O I：

10.1016/j.scriptamat.2009.04.042

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Mg-3Al-1Zn alloy sheets were rolled at high temperatures up to 823 K and subsequently rolled at 498 K using differential speed rolling. The basal texture intensity dramatically weakens with a largely tilted basal pole after annealing. The Erichsen value significantly increases from 3.7 to 9.5 with an increase in the rolling temperature from 498 to 823 K prior to warm rolling due to texture effects. This high Erichsen value is comparable to those of aluminum alloys. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

引用

页码：445 / 448

页数：4

共 50 条

[21] Grain size and texture control of Mg-3Al-1Zn alloy sheet using a combination of equal-channel angular rolling and high-speed-ratio differential speed-rolling processes
Kim, W. J.
Yoo, S. J.
Chen, Z. H.
Jeong, B. H. T.
[J]. SCRIPTA MATERIALIA, 2009, 60 (10) : 897 - 900
[22] Enhancement of plasticity in Mg-3Al-1Zn alloy at cryogenic temperature
Zhang, Kai
Jiang, Jun
[J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 25 : 7454 - 7459
[23] Improved formability of Mg-3Al-1Zn alloy by pre-stretching and annealing
Zhang, Hua
Huang, Guangsheng
Wang, Lifei
Li, Jinhan
[J]. SCRIPTA MATERIALIA, 2012, 67 (05) : 495 - 498
[24] Effect of Severe Caliber Rolling on Superplastic Properties of Mg-3Al-1Zn (AZ31) Alloy
Doiphode, Rajendra
Kulkarni, Rahul
Murty, S. V. S. Narayana
Prabhu, Nityanand
Kashyap, Bhagwati Prasad
[J]. SUPERPLASTICITY IN ADVANCED MATERIALS, 2013, 735 : 327 - +
[25] Athermal influence of pulsed electric current on the twinning behavior of Mg-3Al-1Zn alloy during rolling
Kuang, Jie
Du, Xinpeng
Li, Xiaohui
Yang, Yanyang
Luo, Alan A.
Tang, Guoyi
[J]. SCRIPTA MATERIALIA, 2016, 114 : 151 - 155
[26] Enhanced stretch formability of rolled Mg-3Al-1Zn alloy at room temperature by initial {10-12} twins
Park, Sung Hyuk
Hong, Seong-Gu
Lee, Chong Soo
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 578 : 271 - 276
[27] Effect of Initial Texture on Rollability of Mg-3Al-1Zn Alloy Sheet
Dai, Q.
Lan, W.
Chen, X.
[J]. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2014, 136 (01):
[28] Plastic deformation characteristics of an Mg-3Al-1Zn alloy at low temperatures
Wang, Hao
Dong, Shangli
Lv, Gang
[J]. MATERIALS & DESIGN, 2016, 92 : 143 - 150
[29] Microstructure and tensile properties of Mg-3Al-1Zn sheets produced by hot roller-cold-material rolling
Liu, D.
Bian, M. Z.
Zhu, S. M.
Chen, W. Z.
Liu, Z. Y.
Wang, E. D.
Nie, J. F.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 706 : 304 - 310
[30] Texture and Stretch Formability of Mg-1.5 mass % Zn-0.2 mass % Ce Alloy Rolled at Different Rolling Temperatures
Chino, Yasumasa
Sassa, Kensuke
Mabuchi, Mamoru
[J]. MATERIALS TRANSACTIONS, 2008, 49 (12) : 2916 - 2918

← 1 2 3 4 5 →