Effect of deformation-dependent material parameters on forming limits of thin sheets

被引：19

作者：

Xu, SG ^{[1
]}

Weinmann, KJ ^{[1
]}

机构：

[1] Michigan Technol Univ, Dept Mech Engn Engn Mech, Houghton, MI 49931 USA

来源：

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES | 2000年 / 42卷 / 04期

关键词：

history-dependent material properties; forming limits; voce equation;

D O I：

10.1016/S0020-7403(99)00016-8

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Material properties are deformation history dependent. To take this fact into consideration in forming limit analysis, the material parameters are defined as functions of strain using the Voce equation. These history-dependent material parameters are incorporated in the M-K analysis based on Hill's 1993 yield criterion in which all material parameters are independent, so that the effect of each of these history-dependent parameters on forming limits can be investigated individually. The analysis shows that history-dependent material properties have a significant influence on forming limits. An increasing r-value will increase the limit strain under plane strain (FLD0), which is different from the traditional M-K analysis. Comparison of predicted results with experimental data illustrates that the consideration of history-dependent material properties can improve forming limit predictions considerably. (C) 2000 Elsevier Science Ltd. All rights reserved.

引用

页码：677 / 692

页数：16

共 50 条

[21] Effect of grain size, thickness and prestrain on the forming limits of 63-37 brass sheets
Stachowicz, F
[J]. METALURGIJA, 1998, 37 (03): : 179 - 182
[22] Forming Limits of Several High-Strength Steel Sheets under Proportional/Non-Proportional Deformation Paths
Hino, Ryutaro
Yasuhara, Satoki
Fujii, Yutaka
Hirahara, Atsushi
Yoshida, Fusahito
[J]. ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES XVI, 2014, 939 : 260 - +
[23] Effect of Sheet Thickness and Grain Size on Forming Limit Diagrams of Thin Brass Sheets
Anand, Dhruv
Kumar, D. Ravi
[J]. INNOVATIONS IN INFRASTRUCTURE, 2019, 757 : 435 - 444
[24] Size effects on deformation behavior of ultra-thin-walled corrugated sheets in roll bend forming process
Jiawei Ye
Quanwei Ma
Yuanjing Zhang
Bijin Zhou
Chunju Wang
Zhenwu Ma
[J]. The International Journal of Advanced Manufacturing Technology, 2024, 130 : 1749 - 1758
[25] Size effects on deformation behavior of ultra-thin-walled corrugated sheets in roll bend forming process
Ye, Jiawei
Ma, Quanwei
Zhang, Yuanjing
Zhou, Bijin
Wang, Chunju
Ma, Zhenwu
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 130 (3-4): : 1749 - 1758
[26] Effect of material properties and process parameters on quality of friction stir forming
Gagliardi, Francesco
Navidirad, Mahsa
Ambrogio, Giuseppina
Misiolek, Wojciech Z.
[J]. JOURNAL OF MANUFACTURING PROCESSES, 2021, 70 : 553 - 559
[27] Size effect on material surface deformation behavior in micro-forming process
Deng, J. H.
Fu, M. W.
Chan, W. L.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (13-14): : 4799 - 4806
[28] Effect of plastic deformation of bulk material on frictional behavior in dry metal forming
Suzuki, Tatsuhiro
Wang, Zhigang
Yoshikawa, Yasuharu
[J]. 11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 2014, 81 : 1872 - 1877
[29] Experimental determination of energy-power parameters and components of deformation during cyclic forming of material
Chernomas, V. V.
Sevastyanov, G. M.
Sevastyanov, A. M.
Bondarenko, S., V
[J]. OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2015, (01): : 33 - 41
[30] Prediction of stress- and strain-based forming limits of automotive thin sheets by numerical, theoretical and experimental methods
Beres, Gabor
Weltsch, Zoltan
Lukacs, Zsolt
Tisza, Miklos
[J]. PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018), 2018, 1960

← 1 2 3 4 5 →