Entrainment of solids in an internally circulating fluidized bed with draft tube

被引:26
|
作者
Kim, YT
Song, BH
Kim, SD
机构
[1] KOREA ADV INST SCI & TECHNOL, DEPT CHEM ENGN, TAEJON 305701, SOUTH KOREA
[2] KOREA ADV INST SCI & TECHNOL, ENERGY & ENVIRONM RES CTR, TAEJON 305701, SOUTH KOREA
关键词
circulating fluidized bed; entrainment rate; transport disengaging height; decay coefficients; draft tube;
D O I
10.1016/S1385-8947(96)03166-X
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
The effects of gas velocity and particle size d(p) on the transport disengaging height (TDH) and solid entrainment rate E along the freeboard height were determined in a fluidized bed (0.3 m internal diameter by 2.6 m height) with or without a draft tube (0.1 m internal diameter by 0.3 m height). The entrainment rates of sand (d(p) = 210-610 mu m) and PVC ((d(p)) over bar = 130 mu m) particles along the axial height of the bed were measured by an isokinetic sampling probe. The entrainment rate in the freeboard region decreases exponentially with the freeboard height and the value at the bed surface increases sharply with increasing excess gas velocity (U-U-mf) in the beds with or without a draft tube. The entrainment rate at the bed surface with a draft tube can be predicted by a correlation for conventional fluidized beds. The exponential decay coefficients a in the present and previous studies were correlated in terms of the Froude number and the ratio of gas velocities U-t/U. Also, the TDH values in the beds with and without a draft tube can be determined by TDH=(1/a)In(E-0/0.003). (C) 1997 Elsevier Science S.A.
引用
收藏
页码:105 / 110
页数:6
相关论文
共 50 条
  • [31] Internally circulating fluidized bed for continuous adsorption and desorption
    Reichhold, Alexander
    Hofbauer, Hermann
    [J]. Chemical engineering and processing, 1995, 34 (06): : 521 - 527
  • [32] Solids mixing in the riser of a circulating fluidized bed
    Van de Velden, Manon
    Baeyens, Jan
    Smolders, Kathleen
    [J]. CHEMICAL ENGINEERING SCIENCE, 2007, 62 (08) : 2139 - 2153
  • [33] Axial solids mixing in a circulating fluidized bed
    Teplitsky, YS
    Borodulya, VA
    Nogotov, EF
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2003, 46 (22) : 4335 - 4343
  • [34] Design for fluidized bed with draft tube by DEM analysis
    Terashita, Keijiro
    Natsuyama, Susumu
    Nishimura, Takehiko
    Sakamoto, Hiroshi
    [J]. Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2000, 47 (12): : 1306 - 1311
  • [35] Cold modelling of an internally circulating fluidized bed membrane reactor
    University of British Columbia, Canada
    [J]. Int. J. Chem. Reactor Eng., 2007,
  • [36] Distribution of lumped matter in internally circulating fluidized bed boilers
    Tian, Feng-Guo
    Zhang, Ming-Chuan
    Fan, Hao-Jie
    Gu, Ming-Yan
    Wang, Lei
    Qi, Yong-Feng
    [J]. Dongli Gongcheng/Power Engineering, 2005, 25 (06): : 820 - 824
  • [37] Structure and fluidization of an internally circulating fluidized bed for FGD process
    Yang, Liuchun
    Yang, Wenqi
    Tong, Zhiquan
    [J]. Huanjing Kexue/Environmental Science, 2003, 24 (05):
  • [38] Experimental simulation of particle agglomeration in an internally circulating fluidized bed
    Fan, Haojie
    Chen, Bo
    Yang, Rundong
    Guo, Daochuan
    [J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2018, 91 : 277 - 282
  • [39] Hydrogen from an internally circulating fluidized bed membrane reactor
    Boyd, T
    Grace, J
    Lim, CJ
    Adris, AEM
    [J]. INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING, 2005, 3
  • [40] Flue gas desulfurization in an internally circulating fluidized bed reactor
    Chu, CY
    Hwang, SJ
    [J]. POWDER TECHNOLOGY, 2005, 154 (01) : 14 - 23