Anode supported single chamber solid oxide fuel cells operating in exhaust gases of thermal engine

This project deals with the development and the electrochemical characterization of anode supported single chamber SOFC in a simulated environment of thermal engine exhaust gas. In the present work, a gas mixture representative of exhaust conditions is selected. It is composed of hydrocarbons (HC: propane and propene), oxygen, carbon monoxide, carbon dioxide, hydrogen and water. Only oxygen content is varied leading to different gas mixtures characterized by three ratios R = HC/O-2. Concerning the cell components, a cermet made of nickel and an electrolyte material, Ce0.9Gd0.1O1.95 (CGO) is used as anode and two cathode materials, La0.6Sr0.4Co0.2Fe0.8O3-delta (LSCF) and Pr2NiO4+delta (PNO), are evaluated. The prepared cells are investigated in the various gas mixtures for temperatures ranging from 450 degrees C to 600 degrees C. Ni-CGO/CGO/LSCF-CGO cell has delivered a maximum power density of 15 mW cm(-2) at 500 degrees C with R = HC/O-2 = 0.21, while lower power densities are obtained for the other ratios, R = 0.44 and R = 0.67. Afterwards, LSCF and PNO cathode materials are compared and LSCF is found to deliver the highest power densities. Finally, by improving the electrolyte microstructure, some cells presenting a maximum power density of 25 mW cm(-2) at 550 degrees C are produced. Moreover, up to 17% of initial HC are eliminated in the gas mixture. (C) 2014 Elsevier B.V. All rights reserved.