In-situ fixed bed denitrification in sequential biofiltration: laboratory testing of solid substrates

被引:1
|
作者
Filter, Josefine [1 ]
Bosinsky, Christin [1 ]
Kilinc, Sefine Oksal [1 ]
Ruhl, Aki Sebastian [1 ,2 ]
Jekel, Martin [1 ]
机构
[1] Tech Univ Berlin, Chair Water Qual Control, KF4,Str 17 Juni 135, D-10623 Berlin, Germany
[2] German Environm Agcy, Sect 2 3-1,Schichauweg 58, D-12307 Berlin, Germany
来源
关键词
DOM leaching; filling cost; fixed bed denitrification; gas clogging; sequential biofiltration; trace organic chemicals; WASTE-WATER TREATMENT; NITRATE REMOVAL; BIOLOGICAL DENITRIFICATION; BIODEGRADABLE POLYMERS; ORGANIC-COMPOUNDS; TREATMENT-PLANT; CARBON; AQUACULTURE; SOIL;
D O I
10.2166/wrd.2020.005
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
High nitrate concentrations in wastewater treatment plant effluents and aquifers can challenge sequential biofiltration systems in preventing nitrite and gas formation in the sand bed, as well as to achieve the regulated limit value for nitrate in potable water reuse applications. This study investigates the introduction of electron donors in the form of organic fixed bed materials as an in-situ anoxic zone into sequential biofiltration systems. Laboratory batch and column tests with straw, soft wood, peat, polylactic acid (PLA), and polycaprolacton (PCL) revealed incomplete denitrification with a hydraulic retention time below 10 h, high organic carbon leaching, especially during the first three months, and gas accumulation within the filter bed. Therefore, ex-situ denitrification prior to oxic biofilters or in a defined side-stream treatment is recommended. No enhanced transformation of trace organic chemicals was observed under nitrate reducing conditions. Peat revealed a sorption potential for 5-methyl-benzotriazole, carbamazepine, benzotriazole, and metoprolol.
引用
收藏
页码:394 / 404
页数:11
相关论文
共 50 条
  • [21] In-situ and Laboratory Geotechnical Properties of Municipal Solid Waste from South Eastern Johannesburg
    Okonta, Felix N.
    Tchani-Ngankoue, Frank.
    Karimi, Babak
    [J]. KSCE JOURNAL OF CIVIL ENGINEERING, 2024, 28 (08) : 3151 - 3161
  • [22] The pathway of in-situ ammonium removal from aerated municipal solid waste bioreactor: nitrification/denitrification or air stripping?
    Hao, Yong-Jun
    Ji, Min
    Chen, Ying-Xu
    Wu, Wei-Xiang
    Hao, Yong-Jun
    Zhang, Shu-Guang
    Liu, Han-Qiao
    [J]. WASTE MANAGEMENT & RESEARCH, 2010, 28 (12) : 1057 - 1064
  • [23] Catalyst performance testing -: Radial and axial dispersion related to dilution in fixed-bed laboratory reactors
    Berger, RJ
    Pérez-Ramírez, J
    Kapteijn, F
    Moulijn, JA
    [J]. APPLIED CATALYSIS A-GENERAL, 2002, 227 (1-2) : 321 - 333
  • [24] Evaluation of mechanical performance of cement-bitumen-treated materials through laboratory and in-situ testing
    Meocci, Monica
    Grilli, Andrea
    La Torre, Francesca
    Bocci, Maurizio
    [J]. ROAD MATERIALS AND PAVEMENT DESIGN, 2017, 18 (02) : 376 - 389
  • [25] Geotechnical model development for a very soft estuarine clay with MASW geophysics, in-situ and laboratory testing
    Kelly, R. B.
    Whiteley, R. J.
    [J]. GEOTECHNICAL AND GEOPHYSICAL SITE CHARACTERIZATION 4, VOLS I AND II, 2013, : 1579 - 1584
  • [26] Laboratory and in-situ mechanical characterisation of masonry components by comparing destructive and minor destructive testing techniques
    Cabane, Albert
    Pela, Luca
    Roca, Pere
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2024, 411
  • [27] In-Situ Production of Cellulose Nanocrystal-Alginate Hydrogel Beads and Dye Removal in Fixed Bed Adsorption Column
    Grishkewich, Nathan
    Mohammed, Nishil
    Toffolo, Kayden
    Tam, Kam Chiu
    [J]. ACS ES&T WATER, 2023, 3 (08): : 2267 - 2276
  • [28] In-situ catalytic upgrading of coal pyrolysis tar on carbon-based catalyst in a fixed-bed reactor
    Jin, Lijun
    Bai, Xiaoyu
    Li, Yang
    Dong, Chan
    Hu, Haoquan
    Li, Xian
    [J]. FUEL PROCESSING TECHNOLOGY, 2016, 147 : 41 - 46
  • [29] Real-time control of a catalytic solid in a fixed-bed reactor based on in situ spectroscopy
    Bennici, Simona M.
    Vogelaar, Bas M.
    Nijhuis, T. Alexander
    Weckhuysen, Bert M.
    [J]. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, 2007, 46 (28) : 5412 - 5416
  • [30] Influence of part temperature on in-situ monitoring of powder bed fusion of metals using eddy current testing
    Spurek, Marvin A.
    Spierings, Adriaan B.
    Lany, Marc
    Revaz, Bernard
    Santi, Gilles
    Wicht, Jonatan
    Wegener, Konrad
    [J]. PROGRESS IN ADDITIVE MANUFACTURING, 2024, 10 (1) : 15 - 32