Mechanisms of reaction zone penetration by decay fungi in wood of beech (Fagus sylvatica)

被引:62
|
作者
Schwarze, FWMR [1 ]
Baum, S [1 ]
机构
[1] Univ Freiburg, Inst Forstbot, D-79098 Freiburg, Germany
关键词
reaction zones; polyphenols; soft-rot; selective delignification; degradation modes;
D O I
10.1046/j.1469-8137.2000.00624.x
中图分类号
Q94 [植物学];
学科分类号
071001 ;
摘要
Fungal growth within reaction zones of beech (Fagus sylvatica) challenged by three basidiomycetes, Inonotus hispidus, Ganoderma adspersum, Fomitopsis pinicola, and one ascomycete, Ustulina deusta, was studied in naturally colonized and artificially inoculated wood. All the fungi, except F. pinicola, breached reaction zones, but the mechanisms involved were all somewhat different. Both I. hispidus and U. deusta bypassed blocked cell lumina by tunnelling through cell walls (soft-rot mode), but the latter caused far more decomposition of cell walls. Degradation of polyphenols was slight with I. hispidus and absent with U. deusta. By contrast, G. adspersum preferentially degraded the polyphenolic occlusions in the cell lumina. The failure of F. pinicola to invade reaction zones was typical of a brown rot fungus having limited enzymatic potential and a uniform growth pattern. Mechanisms of lesion expansion, illustrated and summarized in schematic diagrams, are consistent with earlier observations that reaction zones in beech sapwood are static boundaries, which may be successfully breached by white and soft-rot fungi.
引用
收藏
页码:129 / 140
页数:12
相关论文
共 50 条
  • [31] Reaction wood drying kinetics: tension wood in Fagus sylvatica and compression wood in Picea abies
    Tarmian, A.
    Remond, R.
    Faezipour, M.
    Karimi, A.
    Perre, P.
    WOOD SCIENCE AND TECHNOLOGY, 2009, 43 (1-2) : 113 - 130
  • [32] ASSESSMENT OF COLOUR CHANGES AND HYGROSCOPIC PROPERTIES OF BEECH (Fagus sylvatica) WOOD AFTER THERMAL MODIFICATION
    Mitani, Andromachi
    Barboutis, Ioannis
    WOOD IS GOOD - WITH KNOWLEDGE AND TECHNOLOGY TO A COMPETITIVE FORESTRY AND WOOD TECHNOLOGY SECTOR, 2012, : 111 - 118
  • [33] Radial variation of sap flow densities in the sap-wood of beech trees (Fagus sylvatica)
    Gessler, A
    Rienks, M
    Dopatka, T
    Rennenberg, H
    PHYTON-ANNALES REI BOTANICAE, 2005, 45 (03) : 257 - 266
  • [34] Critical levels of O-3 for wood production of European beech (Fagus sylvatica L)
    Mortensen, L
    BastrupBirk, A
    RoPoulsen, H
    WATER AIR AND SOIL POLLUTION, 1995, 85 (03): : 1349 - 1354
  • [35] Colour measurements and gluability investigation on red heart beech wood (Fagus sylvatica L.)
    Hapla, F
    Militz, H
    WOOD RESEARCH, 2004, 49 (04) : 1 - 12
  • [36] The effect of acetylation on bending strength of finger jointed beech wood (Fagus sylvatica L.)
    Antonios N. Papadopoulos
    Holz als Roh- und Werkstoff, 2008, 66 : 309 - 310
  • [37] CHEMICAL CHARACTERISATION OF EUROPEAN BEECH (Fagus sylvatica L.) MATURE WOOD AND FALSE HEARTWOOD
    Vybohova, Eva
    Oberle, Anna
    ACTA FACULTATIS XYLOLOGIAE ZVOLEN, 2023, 65 (02): : 13 - 23
  • [38] Ammonia treated and mechanically densified beech wood (Fagus sylvatica L.): Fixation behaviour
    Hackenberg, Herwig
    Dietrich, Tobias
    Zauer, Mario
    Wagenfuehr, Andre
    10TH HARDWOOD CONFERENCE PROCEEDINGS 2022, 2022, : 217 - 220
  • [39] Influence of Heat Treatment Duration on the Machinability of Beech Wood (Fagus sylvatica L.) by Planing
    Hacibektasoglu, Murat
    Campean, Mihaela
    Ispas, Mihai
    Gurau, Lidia
    BIORESOURCES, 2017, 12 (02): : 2780 - 2791
  • [40] DENSITY OF BEECH (Fagus sylvatica L.) WOOD THROUGH A CROSS-SECTION OF THE TRUNK
    Dudiak, Michal
    ACTA FACULTATIS XYLOLOGIAE ZVOLEN, 2023, 65 (02):