Fabrication and characterization of an anode-supported hollow fiber SOFC

被引：105
|
作者：
Yang, Chunli [1 ]
Li, Wei [1 ]
Zhang, Shangquan [1 ]
Bi, Lei [1 ]
Peng, Ranran [1 ]
Chen, Chusheng [1 ]
Liu, Wei [1 ]
机构：
[1] Univ Sci & Technol China, Lab Adv Funct Mat & Devices, Dept Mat Sci & Engn, Hefei 230026, Anhui, Peoples R China
来源：
JOURNAL OF POWER SOURCES | 2009年 / 187卷 / 01期
关键词：
Solid oxide fuel cells; Ni-YSZ anode-supported; Hollow-fiber; Phase inversion; OXIDE FUEL-CELL; MICRO TUBULAR SOFCS; INTERMEDIATE TEMPERATURE; OPERATION; PERFORMANCE;
D O I：
10.1016/j.jpowsour.2008.10.069
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
In this study, an anode-supported hollow-fiber solid oxide fuel cell (SOFC) of diameter 1.7 mm has been successfully fabricated using the phase inversion and vacuum assisted coating techniques. The cell has a special structure consisting of a 12-mu m-thick yttria-stabilized zirconia (YSZ) electrolyte film and a Ni-YSZ anode layer which has large finger-like pores on both sides of the hollow-fiber membrane. The hollow-fiber SOFC has an active electrode area of 0.63 cm(2) and generates maximum power densities of 124, 287 and 377 mW cm(-2) at 600, 700 and 800 degrees C, respectively, indicating that its use in applications requiring high power density is promising. (c) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码：90 / 92
页数：3
相关论文
共 50 条
  • [41] Three-Dimensional Design Optimization of an Anode-Supported SOFC using FEM
    Andersson, M.
    Yuan, J.
    Sunden, B.
    SOLID OXIDE FUEL CELLS 13 (SOFC-XIII), 2013, 57 (01): : 2485 - 2494
  • [42] Effect of Sintering Temperature and Applied Load on Anode-Supported Electrodes for SOFC Application
    Xuan-Vien Nguyen
    Chang, Chang-Tsair
    Jung, Guo-Bin
    Chan, Shih-Hung
    Huang, Wilson Chao-Wei
    Hsiao, Kai-Jung
    Lee, Win-Tai
    Chang, Shu-Wei
    Kao, I-Cheng
    ENERGIES, 2016, 9 (09)
  • [43] Simulation and Modeling Study of Anode-Supported Planar SOFC Operating with Synthesis Gas
    Suwanwarangkul, R.
    Wattana, K.
    Charojrochkul, S.
    Croiset, E.
    Douglas, P.
    Entchev, E.
    SOLID OXIDE FUEL CELLS 10 (SOFC-X), PTS 1 AND 2, 2007, 7 (01): : 1945 - +
  • [44] Investigation of anode-supported SOFC with cobalt-containing cathode and GDC interlayer
    Jung, Hun-Gi
    Sun, Yang-Kook
    Jung, Hwa Young
    Park, Jong Sung
    Kim, Hae-Ryoung
    Kim, Gyeung-Ho
    Lee, Hae-Weon
    Lee, Jong-Ho
    SOLID STATE IONICS, 2008, 179 (27-32) : 1535 - 1539
  • [45] Performance and ageing of an anode-supported SOFC operated in single-chamber conditions
    Jacques-Bédard, X
    Napporn, TW
    Roberge, R
    Meunier, M
    JOURNAL OF POWER SOURCES, 2006, 153 (01) : 108 - 113
  • [46] Life Cycle Analysis of Ceramic Anode-Supported SOFC System Manufacturing Processes
    Zhao, L.
    Brouwer, J.
    FUEL CELL SEMINAR 2011, 2012, 42 (01): : 247 - 263
  • [47] Development of Anode-Supported Planar SOFC Using Inexpensive and Simple Processing Technique
    Basu, R. N.
    Das Sharma, A.
    Dutta, A.
    Mukhopadhyay, J.
    Maiti, H. S.
    SOLID OXIDE FUEL CELLS 10 (SOFC-X), PTS 1 AND 2, 2007, 7 (01): : 227 - 234
  • [48] Thermo-electrochemical and thermal stress analysis for an anode-supported SOFC cell
    Chiang, Lieh-Kwang
    Liu, Hui-Chung
    Shiu, Yao-Hua
    Lee, Chien-Hsiung
    Lee, Ryey-Yi
    RENEWABLE ENERGY, 2008, 33 (12) : 2580 - 2588
  • [49] Fabrication and Performance Investigation of Three-Cell SOFC Stack Based on Anode-Supported Cells With Magnetron Sputtered Electrolyte
    Solovyev, Andrey
    Ionov, Igor
    Lauk, Alexander
    Linnik, Stepan
    Shipilova, Anna
    Smolyanskiy, Egor
    JOURNAL OF ELECTROCHEMICAL ENERGY CONVERSION AND STORAGE, 2018, 15 (04)
  • [50] Fabrication of Anode-Supported SOFC Single Cells via Tape-Casting of Thin Tapes and Co-Firing
    Moon, Hwan
    Kim, Sun Dong
    Hyun, Sang Hoon
    Kim, Ho Sung
    JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2006, 43 (12) : 788 - 797
12345