Fabrication and characterization of an anode-supported hollow fiber SOFC

被引：104
|
作者：
Yang, Chunli [1 ]
Li, Wei [1 ]
Zhang, Shangquan [1 ]
Bi, Lei [1 ]
Peng, Ranran [1 ]
Chen, Chusheng [1 ]
Liu, Wei [1 ]
机构：
[1] Univ Sci & Technol China, Lab Adv Funct Mat & Devices, Dept Mat Sci & Engn, Hefei 230026, Anhui, Peoples R China
来源：
JOURNAL OF POWER SOURCES | 2009年 / 187卷 / 01期
关键词：
Solid oxide fuel cells; Ni-YSZ anode-supported; Hollow-fiber; Phase inversion; OXIDE FUEL-CELL; MICRO TUBULAR SOFCS; INTERMEDIATE TEMPERATURE; OPERATION; PERFORMANCE;
D O I：
10.1016/j.jpowsour.2008.10.069
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
In this study, an anode-supported hollow-fiber solid oxide fuel cell (SOFC) of diameter 1.7 mm has been successfully fabricated using the phase inversion and vacuum assisted coating techniques. The cell has a special structure consisting of a 12-mu m-thick yttria-stabilized zirconia (YSZ) electrolyte film and a Ni-YSZ anode layer which has large finger-like pores on both sides of the hollow-fiber membrane. The hollow-fiber SOFC has an active electrode area of 0.63 cm(2) and generates maximum power densities of 124, 287 and 377 mW cm(-2) at 600, 700 and 800 degrees C, respectively, indicating that its use in applications requiring high power density is promising. (c) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码：90 / 92
页数：3
相关论文
共 50 条
  • [1] Fabrication and characteristics of anode-supported flat tubular SOFC
    Song, RH
    Kim, JH
    Son, HJ
    Shin, DR
    Yokokawa, H
    [J]. SOLID OXIDE FUEL CELLS VIII (SOFC VIII), 2003, 2003 (07): : 1029 - 1034
  • [2] Electrochemical Analysis of an Anode-Supported SOFC
    Yang, Shuangqiao
    Chen, Tao
    Wang, Ying
    Peng, Zhenbo
    Wang, Wei Guo
    [J]. INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2013, 8 (02): : 2330 - 2344
  • [3] Performance of an anode-supported SOFC with anode functional layers
    Chen, Kongfa
    Chen, Xiangjun
    Lue, Zhe
    Ai, Na
    Huang, Xiqiang
    Su, Wenhui
    [J]. ELECTROCHIMICA ACTA, 2008, 53 (27) : 7825 - 7830
  • [4] FABRICATION AND PROPERTIES OF AN ANODE-SUPPORTED TUBULAR IT-SOFC BASED ON LANTHANUM GALLATE
    Sammes, Nigel
    Du, Yanhai
    [J]. ADVANCES IN SOLID OXIDE FUEL CELLS, 2005, 26 (04): : 33 - 40
  • [5] Improvement of SOFC performance using a microtubular, anode-supported SOFC
    Suzuki, T
    Yamaguchi, T
    Fujishiro, Y
    Awano, M
    [J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2006, 153 (05) : A925 - A928
  • [6] Development of anode-supported SOFC with metallic interconnectors
    Baba, Y
    Ogasawara, K
    Yakabe, H
    Matsuzaki, Y
    Sakurai, T
    [J]. SOLID OXIDE FUEL CELLS VIII (SOFC VIII), 2003, 2003 (07): : 119 - 126
  • [7] Electrical and microstructural characterization of Ni/YSZ cermet anode for anode-supported type SOFC
    Lee, DS
    Heo, JW
    Lee, JH
    Kim, J
    Lee, HW
    Kim, SW
    Kim, GH
    Song, HS
    [J]. SOLID STATE IONICS: TRENDS IN THE NEW MILLENNIUM, PROCEEDINGS, 2002, : 477 - 482
  • [8] Fabrication and Characterization of Anode-Supported Low-Temperature SOFC Based on Gd-Doped Ceria Electrolyte
    Fu, C.
    Ge, X.
    Chan, S. H.
    Liu, Q.
    [J]. FUEL CELLS, 2012, 12 (03) : 450 - 456
  • [9] Fabrication and operation of a 1 kW class anode-supported flat tubular SOFC stack
    Lim, Tak-Hyoung
    Park, Jae-Lyang
    Lee, Seung-Bok
    Park, Seok-Joo
    Song, Rak-Hyun
    Shin, Dong-Ryul
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2010, 35 (18) : 9687 - 9692
  • [10] Improvement in Mechanical Properties of Anode-Supported Planar SOFC
    Kumar, S. Senthil
    Mukhopadhyay, A. K.
    Basu, R. N.
    Maiti, H. S.
    [J]. SOLID OXIDE FUEL CELLS 10 (SOFC-X), PTS 1 AND 2, 2007, 7 (01): : 533 - +
12345