CHARACTERIZATION OF A POLYMER-MATRIX COMPOSITE SUPPORT BEAM

被引：0
|
作者：
Strekelj, Neva [1 ]
Maren, Matevz [1 ]
Naglic, Iztok [1 ]
Demsar, Andrej [1 ]
Dervaric, Evgen [1 ]
Markoli, Bostjan [1 ]
机构：
[1] Univ Ljubljana, Fac Nat Sci & Engn, Ljubljana 1000, Slovenia
来源：
MATERIALI IN TEHNOLOGIJE | 2014年 / 48卷 / 03期
关键词：
polymer-matrix composite; fibre; microstructure; tensile properties;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper deals with the characterization of a polymer-matrix composite support beam designed for the automotive industry. The discussed composite polymer-matrix material was characterized using light microscopy (LM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Vickers hardness (HV) measurements and mechanical testing under tensile loads. Using these characterization methods the diameter, distribution and arrangement of the fibres in the composite material were determined. The type of fibres used in this composite material was also established from the chemical composition determined by EDS. The mechanical properties of the discussed composite material under a tensile load were determined on proportional, sub-sized, tensile specimens prepared from the support beam.
引用
收藏
页码：429 / 432
页数：4
相关论文
共 50 条
  • [41] Damping in advanced polymer-matrix composites
    Adams, R.D. (r.d.adams@bristol.ac.uk), 1600, Elsevier Ltd (355): : 1 - 2
  • [42] Self-monitoring of strain and damage by carbon fiber polymer-matrix composite
    Wang, XJ
    Chung, DDL
    MATERIALS FOR SMART SYSTEMS II, 1997, 459 : 171 - 176
  • [43] Ultrasonic Analytic-Signal Responses From Polymer-Matrix Composite Laminates
    Smith, Robert A.
    Nelson, Luke J.
    Mienczakowski, Martin J.
    Wilcox, Paul D.
    IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 2018, 65 (02) : 231 - 243
  • [44] Damping in advanced polymer-matrix composites
    Adams, RD
    Maheri, MR
    JOURNAL OF ALLOYS AND COMPOUNDS, 2003, 355 (1-2) : 126 - 130
  • [45] Multiscale modeling of polymer-matrix nanocomposites
    Vogiatzis, Georgios G.
    Voyiatzis, Evangelos
    Theodorou, Doros N.
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2012, 244
  • [46] Tension-Compression Fatigue of a Hybrid Polymer-Matrix/Ceramic-Matrix Composite at Elevated Temperature
    Ruggles-Wrenn, Marina
    Schmidt, Joshua
    JOURNAL OF COMPOSITES SCIENCE, 2024, 8 (08):
  • [47] Strain and damage sensing in carbon fiber polymer-matrix composite by electrical resistance measurement
    Pandis, C.
    Georgoussis, G.
    Peoglos, V.
    Kyritsis, A.
    Pissis, P.
    Georgiopoulos, P.
    Kontou, E.
    EMERGING TECHNOLOGIES IN NON-DESTRUCTIVE TESTING V, 2012, : 367 - 372
  • [48] The role of adhesive in the ballistic/structural performance of ceramic/polymer-matrix composite hybrid armor
    Grujicic, M.
    Pandurangan, B.
    d'Entremont, B.
    MATERIALS & DESIGN, 2012, 41 : 380 - 393
  • [49] Predictive model for microcracking and mechanical properties of polymer-matrix composite materials for space applications
    Issoupov, V
    Viel-Inguimbert, V
    Dinguirard, M
    Startsev, OV
    Nikishin, EF
    PROCEEDINGS OF THE 9TH INTERNATIONAL SYMPOSIUM ON MATERIALS IN A SPACE ENVIRONMENT, 2003, 540 : 407 - 412
  • [50] THE EFFECT OF PENTAGONAL AND OCTAGONAL JOINT DESIGN ON THE FATIGUE STRENGTH OF POLYMER-MATRIX COMPOSITE MATERIALS
    Ersan, Cigdem
    Canyurt, Olcay Ersel
    MATERIALI IN TEHNOLOGIJE, 2020, 54 (01): : 143 - 148
12345