Development of 10 kW turbo-Brayton refrigerator for HTS power applications

被引:4
|
作者
Ozaki, S. [1 ]
Hirai, H. [1 ]
Hirokawa, M. [1 ]
Kobayashi, H. [1 ]
机构
[1] Taiyo Nippon Sanso Corp, 10 Okubo, Tsukuba, Ibaraki 3002611, Japan
关键词
D O I
10.1088/1757-899X/502/1/012008
中图分类号
O59 [应用物理学];
学科分类号
摘要
HTS power applications have been developed actively and the refrigerator requires larger cooling power. To satisfy this request we have developed 10 kW class turbo-Brayton refrigerator which has neon gas as working fluid. The refrigerator consists of a pair of turbine-compressors which have turbine, compressor and PM motor on the same shaft. The turbine-compressor has magnetic bearings with no rubbing parts, which results in a long maintenance interval. Neon gas is compressed from 0.5 MPa at inlet to 1.0 MPa at outlet by two compressors and expands through two turbines in parallel. Design cooling capacity is 10 kW at a cooling temperature of 65 K. We made a commercial model refrigerator and tested cool down characteristics, load cycles and cooling capacity using a liquid nitrogen circulation system. Specification and configuration of the refrigerator and test results are shown in this paper.
引用
收藏
页数:5
相关论文
共 50 条
  • [21] Plate-fin heat-exchangers for a 10 kW Brayton cryocooler and a 1 km HTS cable
    Chang, Ho-Myung
    Gwak, Kyung Hyun
    Jung, Seyong
    Yang, Hyung Suk
    Hwang, Si-Dole
    [J]. PROCEEDINGS OF THE 25TH INTERNATIONAL CRYOGENIC ENGINEERING CONFERENCE AND INTERNATIONAL CRYOGENIC MATERIALS CONFERENCE 2014, 2015, 67 : 221 - 226
  • [22] Sub-cooled Liquid Nitrogen Cryogenic System with Neon Turbo-refrigerator for HTS Power Equipment
    Yoshida, S.
    Hirai, H.
    Nara, N.
    Ozaki, S.
    Hirokawa, M.
    Eguchi, T.
    Hayashi, H.
    Iwakuma, M.
    Shiohara, Y.
    [J]. ADVANCES IN CRYOGENIC ENGINEERING, 2014, 1573 : 1246 - 1253
  • [23] Hardware Integration and Performance Analysis of a 10 kW HTS Wind Power Generator
    Hae-Jin Sung
    Byeong-Soo Go
    Minwon Park
    [J]. Journal of Electrical Engineering & Technology, 2019, 14 : 1647 - 1654
  • [24] Hardware Integration and Performance Analysis of a 10 kW HTS Wind Power Generator
    Sung, Hae-Jin
    Go, Byeong-Soo
    Park, Minwon
    [J]. JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY, 2019, 14 (04) : 1647 - 1654
  • [25] Development of HTS BSCCO wire for power applications
    Yi, HP
    Song, XH
    Liu, L
    Liu, R
    Zong, J
    Zhang, JS
    Alamgir, AKM
    Liu, Q
    Han, Z
    Zheng, YK
    [J]. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2005, 15 (02) : 2507 - 2509
  • [26] Development of a 10 kA HTS DC Power Cable
    Xiao, Liye
    Dai, Shaotao
    Lin, Liangzhen
    Teng, Yuping
    Zhang, Hongen
    Liang, Xueming
    Gao, Zhiyuan
    Zhang, Dong
    Song, Naihao
    Zhu, Zhiqing
    Zhang, Fengyuan
    Zhang, Zhifeng
    Li, Xiaochun
    Cao, Zhicheng
    Xu, Xi
    Zhou, Weiwei
    Lin, Yubao
    [J]. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2012, 22 (03)
  • [27] DEVELOPMENT AND INVESTIGATION OF A SOLAR-BIOGAS HYBRID BRAYTON CYCLE FOR 100 KW POWER GENERATION
    Alshahrani, Saad
    Engeda, Abraham
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2018, VOL 6A, 2019,
  • [28] Development of coated conductors by PLD process for HTS power applications
    Ohmatsu, Kazuya
    Abiru, Kenji
    Yamaguchi, Takashi
    Shingai, Yuki
    Konishi, Masaya
    [J]. SEI Technical Review, 2011, (73): : 45 - 51
  • [29] Development of a 25 K pulse tube refrigerator for future HTS-series products in power engineering
    Gromoll, B.
    Huber, N.
    Dietrich, M.
    Yang, L. W.
    Thummes, G.
    [J]. ADVANCES IN CRYOGENIC ENGINEERING, VOLS 51A AND B, 2006, 823 : 643 - +
  • [30] Design, Fabrication, and Analysis of HTS Coils for a 10-kW Wind Power Generator Employing a Brushless Exciter
    Sung, Hae-Jin
    Go, Byeong-Soo
    Park, Heuijoo
    Badcock, Rodney A.
    Park, Minwon
    Yu, In-Keun
    [J]. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2017, 27 (04)