Research on Mechanical Properties of High Boron Alloyed Stainless Steel Composite Plate Containing Titanium

被引：2
|
作者：
Yuan, Linlin [1 ]
Han, Jingtao [1 ]
Liu, Jing [1 ]
Liu, Yanlong [1 ]
机构：
[1] Univ Sci & Technol Beijing, Sch Mat Sci & Engn, Beijing, Peoples R China
来源：
FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY III, PTS 1-3 | 2013年 / 401卷
关键词：
high boron alloyed stainless composite steel with Ti; solution treatment; mechanical roperty;
D O I：
10.4028/www.scientific.net/AMM.401-403.804
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
High boron alloyed stainless steel composite plates with different Ti content by cladding casting and hot forming process were fabricated. The mechanical properties of composite plates were analyzed after solution treatment. The results show that the composite plate has optimal microstructure and properties at 1100 C solution temperature, holding for 4h.The comprehensive properties of the composite plates are improved with the increase of Ti content, but excess Ti content can lower the plasticity. The elongation and the tensile strength of composite plate reaches 29% and 527MPa respectively, the mechanical properties can meet and exceed the supply standard requirements in ASTM A887-89 of U.S. when the reasonable content of Titanium is about 5%.
引用
收藏
页码：804 / 808
页数：5
相关论文
共 50 条
  • [21] Microstructure Characterization and Mechanical Properties of Stainless Steel Clad Plate
    Li, Hao
    Zhang, Liyuan
    Zhang, Boyang
    Zhang, Qingdong
    MATERIALS, 2019, 12 (03)
  • [22] Research on microstructure and mechanical properties of explosively welded stainless steel/commercially pure Ti plate
    Malek, Marcin
    Wachowski, Marcin
    Kosturek, Robert
    MANUFACTURING REVIEW, 2019, 6
  • [23] Effect of heat-treatment on the hardness and mechanical properties of Boron Alloyed Steel
    bin Khiyon, Mohammad Raffik
    Salleh, Salwani Mohd
    2ND INTERNATIONAL CONFERENCE ON AUTOMOTIVE INNOVATION AND GREEN VEHICLE (AIGEV 2016), 2017, 90
  • [24] Liquid phase sintering of a boron alloyed austenitic stainless steel
    Molinari, A.
    Menapace, C.
    Kazior, J.
    Pieczonka, T.
    PROGRESS IN POWDER METALLURGY, PTS 1 AND 2, 2007, 534-536 : 553 - +
  • [25] MECHANICAL AND STRUCTURAL PROPERTIES OF JOINTS OF STAINLESS STEEL AND TITANIUM BRAZED WITH SILVER FILLER METALS CONTAINING TIN
    Winiowski, A.
    ARCHIVES OF METALLURGY AND MATERIALS, 2010, 55 (04) : 991 - 1000
  • [26] Microstructure, precipitation and mechanical properties of a titanium-tungsten alloyed hot rolled high strength steel
    Wang, Zhenqiang
    Sun, Yuhang
    Zhou, Yanyuan
    Yang, Zhigang
    Jiang, Fengchun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 718 : 56 - 63
  • [27] Effect of High-Temperature Normalizing Heat Treatment on Interfacial Microstructure and Mechanical Properties of Rolled Titanium Steel Composite Plate
    Pan, Xinyuan
    Jiang, Jin
    Wan, Tianjian
    Liu, Li
    Zhang, Ke
    Li, Jinghui
    Yang, Gengwei
    Zhang, Mingya
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (11) : 5517 - 5528
  • [28] Mechanical properties of friction stir welded high nitrogen containing austenitic stainless steel
    Miyano, Y.
    Fujii, H.
    Sun, Y. F.
    Katada, Y.
    Kuroda, S.
    Kudo, G.
    Kamiya, O.
    PROCEEDINGS OF THE 1ST INTERNATIONAL JOINT SYMPOSIUM ON JOINING AND WELDING, 2013, : 95 - 100
  • [29] Sintering and mechanical properties of a boron-doped austenitic stainless steel
    Tandon, R
    German, RM
    INTERNATIONAL JOURNAL OF POWDER METALLURGY, 1998, 34 (01): : 40 - 49
  • [30] Effects of gaseous media on interfacial microstructure and mechanical properties of titanium/steel explosive welded composite plate
    Zeng, Xiang-yu
    Wang, Yu-xin
    Li, Xue-qi
    Li, Xiao-jie
    Zhao, Tie-jun
    FUSION ENGINEERING AND DESIGN, 2019, 148
12345