Electrode Performance in a Solid Oxide Electrolyzer Cell (SOEC)

被引:4
|
作者
Lee, K. J. [1 ]
Seo, J. W. [1 ]
Yoon, J. S. [1 ]
Hwang, H. J. [1 ]
机构
[1] Inha Univ, Div Mat Sci & Engn, Inchon 402751, South Korea
来源
SOLID OXIDE FUEL CELLS 13 (SOFC-XIII) | 2013年 / 57卷 / 01期
关键词
LSM;
D O I
10.1149/05701.3255ecst
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
An electrolyte-supported solid oxide electrolysis cell (SOEC) consisting of a ScSZ (Sc2O3-stabilized ZrO2) electrolyte, Ni-YSZ cathode and LSCF (lanthanum strontium cobalt ferrite)-GDC (Gd2O3-doped CeO2) anode was fabricated. Current density-voltage (j-V) curves were obtained for the cell under SOFC and SOEC modes and the cell performance was discussed in combination with corresponding EIS measurements. It was possible to determine the ohmic, cathodic and anodic contributions to the total polarization loss using the three-electrode technique. It was found that the overpotential of the Ni-YSZ electrode contributed largely to the performance of the cell.
引用
收藏
页码:3255 / 3260
页数:6
相关论文
共 50 条
  • [41] Asymmetric behavior of solid oxide cells between fuel cell and electrolyzer operations
    Kishimoto, Masashi
    Tanimura, Yuya
    Seo, Haewon
    Iwai, Hiroshi
    Yoshida, Hideo
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2023, 48 (31) : 11790 - 11805
  • [42] Thermal stability of a new solid oxide fuel/electrolyzer cell seal glass
    Jin, T.
    Lu, K.
    [J]. JOURNAL OF POWER SOURCES, 2010, 195 (01) : 195 - 203
  • [43] Computational fluid dynamics modeling of a solid oxide electrolyzer cell for hydrogen production
    Ni, Meng
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2009, 34 (18) : 7795 - 7806
  • [44] THE EFFECT OF ANODE POROSITY ON THE PERFORMANCE OF PLANAR ELECTRODE SUPPORTED SOLID OXIDE FUEL CELL
    Yu, Jianguo
    Wang, Yuzhang
    Weng, Shilie
    Hui, Yu
    [J]. MNHMT2009, VOL 2, 2010, : 259 - 264
  • [45] Entropy engineering strategies for optimizing solid oxide cell air electrode performance: A review
    Chen, Zhaohui
    Ma, Ben
    Dang, Chen
    Zhou, Yingke
    [J]. Journal of Alloys and Compounds, 2025, 1010
  • [46] Solid Oxide Fuel Cell Electrode 3D Microstructure and Performance Modeling
    Rhazaoui, K.
    Cai, Q.
    Shearing, P.
    Adjiman, C. S.
    Brandon, N. P.
    [J]. SOLID OXIDE FUEL CELLS 12 (SOFC XII), 2011, 35 (01): : 1097 - 1105
  • [47] A study on solid oxide electrolyzer stack and system performance based on alternative mapping models
    Ba, Liming
    Xiong, Xingyu
    Lei, Ze
    Yang, Zhibin
    Ge, Ben
    Hu, Liang
    Jin, Yiqian
    Peng, Suping
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2022, 47 (25) : 12469 - 12486
  • [48] La2NiO4 + δ as electrode material for solid oxide fuel cells and electrolyzer cells
    Egger, Andreas
    Schroedl, Nina
    Gspan, Christian
    Sitte, Werner
    [J]. SOLID STATE IONICS, 2017, 299 : 18 - 25
  • [49] Boosting solid oxide electrolyzer performance by fine tuning the microstructure of electrodes - Preliminary study
    Kupecki, Jakub
    Niemczyk, Anna
    Jagielski, Stanislaw
    Kluczowski, Ryszard
    Kosiorek, Magdalena
    Machaj, Krystian
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2023, 48 (68) : 26436 - 26445
  • [50] Electrode performance in reversible solid oxide fuel cells
    Marina, O. A.
    Pederson, L. R.
    Williams, M. C.
    Coffey, G. W.
    Meinhardt, K. D.
    Nguyen, C. D.
    Thomsen, E. C.
    [J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2007, 154 (05) : B452 - B459