Influence of Extrusion Temperature on Microstructure of Ti-47A1-2Cr-2Nb-0. 15B

被引：0
|
作者：
Liu, Renci [1 ]
Liu, Dong [1 ]
Cui, Yuyou [1 ]
Yang, Rui [1 ]
机构：
[1] Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
来源：
TI-2011: PROCEEDINGS OF THE 12TH WORLD CONFERENCE ON TITANIUM, VOL II | 2012年
关键词：
gamma-titanium aluminide (TiAI); extrusion temperature; microstructure; thermomechanical treatment; GAMMA-TITANIUM ALUMINIDE; ALLOYS;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Influences of extrusion temperature on the deformed and subsequently thermomechanically treated lamellar (TMTL) microstructures of Ti47A1-2Cr-2Nb-0. 15B alloy as observed on the transverse section were investigated. Canned ingots were axisymmetrically-extruded through a flat die to an extrusion ratio of 8 1. The extruded rods on the transverse section consisted of fine duplex microstructure at the edge and fully lamellar (FL) at the center. However, the FL microstructure at the center changed with increasing extrusion temperature: the rods contained remnant lamellae and partially recrystallized FL grains after extrusion at 1250 degrees C and 1280 degrees C, and consisted of completely recrystallized grains after extrusion at 1300 degrees C, with the size and volume fraction of the recrystallized FL grains increasing with the increase of extrusion temperature. The heterogeneity of deformed and TMTL microstructures is believed to be caused by nonuniform deformation and temperature distribution due to deformation heating and die chilling.
引用
收藏
页码：1553 / 1557
页数：5
相关论文
共 50 条
  • [41] The Si influence on the microstructure and oxidation resistance of Ti-Al slurry coatings on Ti-48Al-2Cr-2Nb alloy
    Moskal, G.
    Migas, D.
    Mendala, B.
    Kalamarz, P.
    Mikuskiewicz, M.
    Iqbal, A.
    Jucha, S.
    Goral, M.
    MATERIALS RESEARCH BULLETIN, 2021, 141
  • [42] Temperature-dependent mechanical properties and fracture behavior of directionally solidified Ti47Al2Cr2Nb alloy
    Wang, Yongzhe
    Liu, Xinwang
    Dong, Duo
    Zhu, Dongdong
    Ding, Hongsheng
    Chen, Ruirun
    Guo, Jingjie
    Fu, Hengzhi
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 25 : 570 - 580
  • [43] TEM observations of twin intersections in a Ti-47Al-2Cr-2Nb-0.1Y alloy compressed at room temperature
    Chen, C. L.
    Lu, W.
    Cui, Y. Y.
    He, L. L.
    Ye, H. Q.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 454 (1-2) : 201 - 205
  • [44] Constitutive relationship for high temperature deformation of powder metallurgy Ti-47Al-2Cr-2Nb-0.2W alloy
    Liang, Xiao-peng
    Liu, Yong
    Li, Hui-zhong
    Zhou, Can-xu
    Xu, Guo-fu
    MATERIALS & DESIGN, 2012, 37 : 40 - 47
  • [45] Microstructure and oxidation behavior of a SiC-Al2O3-glass composite coating on Ti-47Al-2Cr-2Nb alloy
    Li, Wenbo
    Chen, Minghui
    Wu, Mingyu
    Zhu, Shenglong
    Wang, Cheng
    Wang, Fuhui
    CORROSION SCIENCE, 2014, 87 : 179 - 186
  • [46] Microstructure and Mechanical Properties ofAs-forgedTi-47Al-2Cr-2Nb-Y Alloy
    Zhang, Shuzhi
    Kong, Fantao
    Chen, Yuyong
    Xiao, Shulong
    Cao, Chao
    ADVANCED MATERIALS AND PROCESSES, PTS 1-3, 2011, 311-313 : 1873 - +
  • [47] Joining Ti-47Al-2Cr-2Nb with a Ti/(Cu,Ni)/Ti clad-laminated braze alloy
    A. Guedes
    A. M. P. Pinto
    M. F. Vieira
    F. Viana
    Journal of Materials Science, 2003, 38 : 2409 - 2414
  • [48] Joining Ti-47Al-2Cr-2Nb with a Ti/(Cu,Ni)/Ti clad-laminated braze alloy
    Guedes, A
    Pinto, AMP
    Vieira, MF
    Viana, F
    JOURNAL OF MATERIALS SCIENCE, 2003, 38 (11) : 2409 - 2414
  • [49] Microstructural evolution of Ti-47Al-2Cr-2Nb-0.8B alloy prepared by semi-solid process
    Zheng, Li-Jing
    Wang, Jian-Ji
    Zhang, Hu
    RARE METALS, 2020, 39 (11) : 1262 - 1266
  • [50] Effects of thermal exposure on the tensile and fatigue properties of cast Ti-47Al-2Cr-2Nb-0.15B alloy
    Cui, YY
    Xiang, HF
    Jia, Q
    Yang, R
    ACTA METALLURGICA SINICA, 2005, 41 (01) : 108 - 112
12345