Effect of the continuous annealing process on microstructure and mechanical properties of DP590 Steel

被引：1

作者：

Wang Hong-bin ^{[1
]}

Xing Rui ^{[1
]}

Yu Yi-yao ^{[1
]}

Li Ji-guang ^{[1
]}

Yang Ji-hong ^{[2
]}

Long Ping ^{[2
]}

机构：

[1] Unvierstiy Sci & Technol Liaoning, Sch Mat Sci & Engn, Anshan 114051, Peoples R China

[2] Tianjin Ansteel Tiantie Cold Rolled Sheet Co Ltd, Tianjin 300301, Peoples R China

来源：

ADVANCED MATERIALS AND PROCESSES III, PTS 1 AND 2 | 2013年 / 395-396卷

关键词：

annealing temperature; over-aging temperature; martensite;

D O I：

10.4028/www.scientific.net/AMM.395-396.313

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The microstructure and mechanical properties of the continuous annealing DP590 steel produced by a cold rolled plant were studied by utilizing a Gleeble thermal simulator tested machine. The results show that, increasing annealing temperature can not effectively improve the martensite content in the steel and annealing temperature be set at 780 degrees C and 800 degrees C is rational. Martensite decomposition at high overaging temperature will decrease tensile strength of the samples. As the overaging temperature sets at 250 degrees C similar to 300 degrees C, the samples could achieve tensile strength more than 600 MPa, which meet the requirements of DP590.

引用

页码：313 / +

页数：2

共 50 条

[21] High temperatures deformation and formability behavior of DP590 steel: mechanical characterization and modeling
K. Seshacharyulu
Gauri Mahalle
Nitin Kotkunde
Swadesh Kumar Singh
B. Balu Naik
[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2021, 43
[22] Characterization of mechanical properties by indentation tests and FE analysis - validation by application to a weld zone of DP590 steel
Chung, Kyung-Hwan
Lee, Wonoh
Kim, Ji Hoon
Kim, Chongmin
Park, Sung Ho
Kwon, Dongil
Chung, Kwansoo
[J]. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2009, 46 (02) : 344 - 363
[23] Effect of base metal chemical composition on properties of resistance spot welding joint of DP590 steel
Wang, Min
Wu, Yixiong
Pan, Hua
Lei, Ming
[J]. Hanjie Xuebao/Transactions of the China Welding Institution, 2010, 31 (02): : 33 - 35
[24] Effect of Warm Rolling on Laminated Ultra-fine Grained Dual-phase Microstructure and Tensile Properties of DP590 Steel
Su Y.-F.
Li H.-J.
Xu X.-N.
Ye Q.-B.
[J]. Dongbei Daxue Xuebao/Journal of Northeastern University, 2023, 44 (03): : 357 - 362and369
[25] Mechanical properties of hot-dip galvanized dual phase steel DP590 and its constitutive model
Niu, Jian-Hui
Zhu, Ping
Guo, Yong-Jin
[J]. Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 2010, 44 (10): : 1382 - 1387
[26] Microstructure and performance of DP590 cold rolled steel strip after heat treatment processes
[J]. Li, Z.-X. (lzx1669@163.com), 2013, Northeast University (34):
[27] Microstructure and mechanical properties of dual phase strip steel in the overaging process of continuous annealing
Li, Chang-sheng
Li, Zhen-xing
Cen, Yi-ming
Ma, Biao
Huo, Gang
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 627 : 281 - 289
[28] Effects of Continuous Annealing Process Parameters on the Microstructure and Mechanical Properties of Dual Phase Steel
Kong, Zheng
Zhang, Jie
Li, Hongbo
Kong, Ning
[J]. STEEL RESEARCH INTERNATIONAL, 2018, 89 (08)
[29] Effect of composition and inter-critical annealing parameters on microstructure and mechanical properties of DP steel
Prabhat K Rai
D Satish Kumar
G Balachandran
[J]. Sādhanā, 47
[30] Effect of composition and inter-critical annealing parameters on microstructure and mechanical properties of DP steel
Rai, Prabhat K.
Kumar, D. Satish
Balachandran, G.
[J]. SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2022, 47 (03):

← 1 2 3 4 5 →