Reflow Oven for Heating and Soldering SMD and BGA Components

被引：0
|
作者：
Pawlowski, Pawel [1 ]
Dabrowski, Adam [1 ]
Grenz, Marcin [2 ]
Bladowski, Michal [2 ]
机构：
[1] Poznan Univ Tech, Div Signal Proc & Elect Syst, Poznan, Poland
[2] PRO SERV COM Sp Zoo, Bydgoszcz, Poland
来源：
PROCEEDINGS OF THE 25TH INTERNATIONAL CONFERENCE MIXED DESIGN OF INTEGRATED CIRCUITS AND SYSTEM (MIXDES 2018) | 2018年
关键词：
reflow oven; soldering; surface mounted devices; ball grid arrays; components;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
This paper presents a design and realization of a universal reflow oven for both healing and soldering of MID components, including reboiling of BCA packages. The reflow oven is composed of two blocks in separate housings: a control system and a hearing system. The control system was built with the Siemens SIMATIC S7-1200 PLC (programmable logic controller) with additional modules. The heating system consists of a three-zoned thermally isolated heating chamber with an original upper inspection window. Some original solutions were proposed, which significantly facilitated operation of the device. Tests of the reflow oven confirmed relevance of the design assumptions and high quality of the product.
引用
收藏
页码：324 / 329
页数：6
相关论文
共 50 条
  • [31] The influence of reflow peak temperature on BGA solder joints' mechanical reliability in backside compatible soldering
    Chen, Limin
    Liu, Sang
    Ye, Yuming
    Tu, Yunhua
    Song, Zhiwei
    Xiang, Zhao
    Xu, Zhi
    [J]. 2006 INTERNATIONAL CONFERENCE ON ELECTRONIC MATERIALS AND PACKAGING, VOLS 1-3, 2006, : 1105 - 1126
  • [32] Thermal stress-strain simulation analysis of BGA solder joint reflow soldering process
    Tang, Xiang-qiong
    Huang, Chun-yue
    Zhao, Sheng-jun
    Lu, Liang-kun
    [J]. 2018 19TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2018, : 981 - 986
  • [33] On Reflow Soldering Process and Reflow Profile
    Gui, Xulong
    Zhang, Zongyang
    Xu, Ling
    Liu, Sheng
    [J]. 2012 13TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING (ICEPT-HDP 2012), 2012, : 865 - 870
  • [34] Photonic Flash Soldering of Thin Chips and SMD Components on Foils for Flexible Electronics
    van den Ende, Daan A.
    Hendriks, Rob
    Cauchois, Romain
    Kusters, Roel H. L.
    Cauwe, Maarten
    Groen, Wilhelm A.
    van den Brand, Jeroen
    [J]. IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2014, 4 (11): : 1879 - 1886
  • [35] Infrared heating in the technology of soldering components in electronics
    Lanin, V. L.
    [J]. SURFACE ENGINEERING AND APPLIED ELECTROCHEMISTRY, 2007, 43 (05) : 381 - 386
  • [36] Infrared heating in the technology of soldering components in electronics
    V. L. Lanin
    [J]. Surface Engineering and Applied Electrochemistry, 2007, 43 (5) : 381 - 386
  • [37] Investigating the self-alignment of chip components during reflow soldering
    Department of Electronics Technology, BME, Building V2, H-1111 Budapest Goldmann Gy. t. 3, Hungary
    [J]. Period Polytech Electr Eng, 2008, 1-2 (67-75):
  • [38] Reflow soldering to gold
    [J]. Banks, Sherman, 1600, Cahners Publ Co, Des Plaines, IL, United States (35):
  • [39] SMD SOLDERING TECHNOLOGY DEVELOPMENT
    PAI, DK
    [J]. WELDING JOURNAL, 1987, 66 (10) : 51 - 59
  • [40] Heat Transfer Modeling and Oven Temperature Curve Optimization of Integrated Circuit Board Reflow Soldering
    Ma, Geng
    Huang, Xiaoqing
    Liu, Shihao
    [J]. IEEE ACCESS, 2021, 9 : 141876 - 141889
12345