Study on ultrasonic cavitation based solidification processing and nanoparticle feeding for high volume fabrication of aluminum matrix nanocomposites

被引：0
|
作者：
Yang, Yong [1 ]
Li, Xiaochun [1 ]
机构：
[1] Univ Wisconsin, Dept Mech Engn, Madison, WI 53706 USA
来源：
MANUFACTURING ENGINEERING AND MATERIALS HANDLING, 2005 PTS A AND B | 2005年 / 16卷
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Lightweight metal matrix nano-composites (MMNCs) (metal matrix with nano-sized ceramic particles) can be of significance for automobile, aerospace and numerous other applications. It would be advantageous to produce low-cost as-cast bulk lightweight components of aluminum based MMNCs. However, it is extremely difficult to disperse nano-sized ceramic particles uniformly in molten aluminum. In this paper, a high power ultrasonic probe is used to disperse nano-size SiC particles in aluminum alloy A356. Experiment results show that the ultrasonic cavitation based dispersion of naoparticles in molten aluminum alloy is effective. The uniform nano particle dispersion resulted in significantly improved mechanical properties. Various nanopartilce feeding techniques were investigated and experimental results are presented.
引用
收藏
页码：975 / 979
页数：5
相关论文
共 50 条
  • [11] Numerical simulation and experimental validation of SIC nanoparticle distribution in magnesium melts during ultrasonic cavitation based processing of magnesium matrix nanocomposites
    Song, Shangyu
    Zhou, Xia
    Li, Li
    Ma, Wuming
    ULTRASONICS SONOCHEMISTRY, 2015, 24 : 43 - 54
  • [12] Mg-6Zn/1.5%SiC nanocomposites fabricated by ultrasonic cavitation-based solidification processing
    Cao, G.
    Choi, H.
    Konishi, H.
    Kou, S.
    Lakes, R.
    Li, X.
    JOURNAL OF MATERIALS SCIENCE, 2008, 43 (16) : 5521 - 5526
  • [13] Mg–6Zn/1.5%SiC nanocomposites fabricated by ultrasonic cavitation-based solidification processing
    G. Cao
    H. Choi
    H. Konishi
    S. Kou
    R. Lakes
    X. Li
    Journal of Materials Science, 2008, 43 : 5521 - 5526
  • [14] Preparation of SiC Nano-particulates Reinforced Aluminum Matrix Nanocomposites by High Intensity Ultrasonic Cavitation Process
    Poovazhagan, L.
    Kalaichelvan, K.
    Rajadurai, A.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2014, 67 (02) : 229 - 237
  • [15] Preparation of SiC Nano-particulates Reinforced Aluminum Matrix Nanocomposites by High Intensity Ultrasonic Cavitation Process
    L. Poovazhagan
    K. Kalaichelvan
    A. Rajadurai
    Transactions of the Indian Institute of Metals, 2014, 67 : 229 - 237
  • [16] Advanced Numerical Modeling of the Dispersion of Ceramic Nanoparticles during Ultrasonic Cavitation Processing and Solidification of 6061-based Nanocomposites
    Zhang, D.
    Nastac, L.
    MCWASP XIV: INTERNATIONAL CONFERENCE ON MODELLING OF CASTING, WELDING AND ADVANCED SOLIDIFICATION PROCESSES, 2015, 84
  • [17] Microstructure Characteristics of A356 Nanocomposites Manufactured via Ultrasonic Cavitation Processing Under Controlled Solidification Conditions
    Xuan, Yang
    Nastac, Laurentiu
    TMS 2017 146TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, 2017, : 297 - 303
  • [18] Tensile Properties and Microstructure of SiC Nanoparticle–Reinforced Mg-4Zn Alloy Fabricated by Ultrasonic Cavitation–Based Solidification Processing
    G. Cao
    J. Kobliska
    H. Konishi
    X. Li
    Metallurgical and Materials Transactions A, 2008, 39 : 880 - 886
  • [19] Research progress on ultrasonic cavitation based dispersion of nanoparticles in Al/Mg melts for solidification processing of bulk lightweight metal matrix nanocomposite
    Li, Xiaochun
    Materials Processing Under the Influence of External Fields, 2007, : 133 - 138
  • [20] Liquid Processing of Bismuth-Silica Nanoparticle/Aluminum Matrix Nanocomposites for Heat Storage Applications
    Ma, Binghua
    Baaziz, Walid
    Mazerolles, Leo
    Ersen, Ovidiu
    Sahut, Bernard
    Sanchez, Clement
    Delalande, Stephane
    Portehault, David
    ACS APPLIED NANO MATERIALS, 2022, : 1917 - 1924
12345