Application of TCD for brittle fracture of notched PUR materials

被引：51
|
作者：
Negru, R. [1 ]
Marsavina, L. [1 ]
Voiconi, T. [1 ]
Linul, E. [1 ]
Filipescu, H. [1 ]
Belgiu, G. [1 ]
机构：
[1] Univ Politeh Timisoara, Timisoara, Romania
来源：
THEORETICAL AND APPLIED FRACTURE MECHANICS | 2015年 / 80卷
关键词：
Polyurethane materials; Theory of critical distances; Notch; Mixed mode loading; CRITICAL DISTANCES; STATIC STRENGTH; COMPONENTS; CRACKS; HOLE;
D O I：
10.1016/j.tafmec.2015.05.005
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The notch effect in Polyurethane materials of different densities is investigated. Tensile specimens with lateral V and U symmetric notches and with holes of different diameters were tested. The material parameters inherent stress and critical distance are determined using a linear elastic finite element analysis in conjunction with experimental results of average maximum load. The paper proposed an original correlation between critical distance and the cell diameter of the cellular structure, respectively between inherent stress and the ultimate tensile strength of Polyurethane materials. Then for single edge notch specimens a relationship between critical distance and applied mixed mode is found and successfully applied to assess the brittle mixed mode of Polyurethane materials. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：87 / 95
页数：9
相关论文
共 50 条
  • [21] BRITTLE-FRACTURE IN NOTCHED SPECIMENS OF INTERGRANULAR EMBRITTLED STEELS
    SHINODA, T
    NAKAMURA, T
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1979, 19 (07) : 435 - 439
  • [22] INFLUENCE OF PRELOADING ON BRITTLE-FRACTURE OF NOTCHED STEEL SPECIMENS
    NAKAMURA, M
    TSUYA, K
    TRANSACTIONS OF NATIONAL RESEARCH INSTITUTE FOR METALS, 1977, 19 (05): : 211 - 218
  • [23] Statistical aspects of brittle fracture with application to materials of rod/fibre geometry
    Warren, PD
    FRACTURE MECHANICS OF CERAMICS, VOL 11: R-CURVE BEHAVIOR, TOUGHNESS DETERMINATION, AND THERMAL SHOCK, 1996, 11 : 441 - 450
  • [24] APPLICATION OF FRACTAL GEOMETRY TO DAMAGE DEVELOPMENT AND BRITTLE-FRACTURE IN MATERIALS
    ANDERSON, TL
    SCRIPTA METALLURGICA, 1989, 23 (01): : 97 - 102
  • [25] APPLICATION OF WEIBULL STRESS CRITERION TO BRITTLE FRACTURE ASSESSMENT OF HAZ-NOTCHED WELDS WITH RESIDUAL STRESS
    Seko, Yusuke
    Imai, Yasuhito
    Mitsuya, Masaki
    Oguchi, Noritake
    Minami, Fumiyoshi
    PROCEEDINGS OF THE 10TH INTERNATIONAL PIPELINE CONFERENCE - 2014, VOL 3, 2014,
  • [26] Fracture parameters determination of polyurethane materials for application of SED criteria to notched components
    Piccotin, Alberto
    Marsavina, Liviu
    Berto, Filippo
    Negru, Radu
    21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21), 2016, 2 : 1861 - 1869
  • [27] A chevron-notched bowtie micro-beam bend test for fracture toughness measurement of brittle materials
    Cui, Fiona Yuwei
    Vinci, Richard P.
    SCRIPTA MATERIALIA, 2017, 132 : 53 - 57
  • [28] Fracture of V-notched specimens under mixed mode (I plus II) loading in brittle materials
    Gomez, F. J.
    Elices, M.
    Berto, F.
    Lazzarin, P.
    INTERNATIONAL JOURNAL OF FRACTURE, 2009, 159 (02) : 121 - 135
  • [29] THE NOTCHED SLOW-BEND TEST AS A BRITTLE-FRACTURE TEST
    DEGRAAF, JE
    VANDERVEEN, JH
    JOURNAL OF THE IRON AND STEEL INSTITUTE, 1953, 173 (01): : 19 - 30
  • [30] Kinetics of brittle fracture of elastic materials
    Vakulenko, AA
    Kukushkin, SA
    PHYSICS OF THE SOLID STATE, 1998, 40 (07) : 1147 - 1150
12345