Effect of joint configuration on resistance spot weldability of galvanised DP780 steel sheets

被引：7
|
作者：
Wei, S. T. [1 ]
Liu, R. D. [1 ]
Lv, D. [1 ]
Lin, L. [1 ]
Lu, X. F. [1 ]
Ding, S. W. [1 ]
机构：
[1] Angang Steel Co Ltd, Automobile & Home Appliance Steel Inst, Ctr Technol, 63 Wuyi Rd, Anshan 114009, Peoples R China
来源：
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING | 2016年 / 21卷 / 03期
关键词：
Resistance spot welding; Multilayer spot weld; Joint configuration; Macrostructure; Splash; Mechanical properties; Nugget diameter; HIGH-STRENGTH STEELS; LOW-CARBON STEEL; MECHANICAL-PROPERTIES; WELDED-JOINTS; FAILURE MODE; PERFORMANCE; GROWTH; SIZE;
D O I：
10.1179/1362171815Y.0000000081
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A 780 MPa galvanised dual phase (DP) steel was two-, three- and four-layer resistance spot welded under different welding parameters and joint configurations. The splash situation, nugget sizes and tensile shear properties of the spot welds were evaluated systematically. The results showed that the splash occurring current increased in the order of two-, three- and four-layer spot welds owing to the increasing metal volume for melting. The joint configuration had a great influence on the tensile shear properties of the spot welds. The three- and four-layer spot welds with proper joint configurations had better weld quality than the two- layer spot weld. Therefore, well designed multilayer spot welds could be used to replace the commonly used two- layer spot welds in actual production.
引用
收藏
页码：178 / 185
页数：8
相关论文
共 50 条
  • [41] Resistance spot weldability of 11Cr-ferritic/martensitic steel sheets
    Uwaba, Tomoyuki
    Yano, Yasuhide
    Ito, Masahiro
    JOURNAL OF NUCLEAR MATERIALS, 2012, 421 (1-3) : 132 - 139
  • [42] Hot-dip galvanising behaviours of a CMnSiCr DP780 steel
    Huang, Feng
    Chen, Yu
    Hua, Lin
    Zhou, Jianxin
    Wang, Zhou
    Fang, Fang
    IRONMAKING & STEELMAKING, 2019, 46 (06) : 529 - 534
  • [43] Improvement of process robustness in weld bonding of galvanized DP780 steel
    1600, American Welding Society (93):
  • [44] Characterisation of microstructure, mechanical properties and fracture mode of the dissimilar joining of AISI 304 stainless steel and DP780 dual phase steel by resistance spot welding
    Sabzi M.
    Far S.M.
    Dezfuli S.M.
    International Journal of Materials and Product Technology, 2019, 59 (01): : 3 - 15
  • [45] Study on Fiber Laser Welding for DP780 High Strength Steel
    Huang, Tao
    Xin, Lijun
    Wang, Zhiyong
    MECHATRONICS AND MATERIALS PROCESSING I, PTS 1-3, 2011, 328-330 : 48 - +
  • [46] Improvement of Process Robustness in Weld Bonding of Galvanized DP780 Steel
    Zhang, Y. S.
    Sun, H. T.
    Wang, Pei-Chung
    Chen, G. L.
    WELDING JOURNAL, 2014, 93 (12) : 472S - 481S
  • [47] A comprehensive investigation on the damage induced by the shearing process in DP780 steel
    Han, S.
    Chang, Y.
    Wang, C. Y.
    Dong, H.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2022, 299
  • [48] Characterisation of microstructure, mechanical properties and fracture mode of the dissimilar joining of AISI 304 stainless steel and DP780 dual phase steel by resistance spot welding
    Sabzi, Masoud
    Far, Sadegh Moeini
    Dezfuli, Saeid Mersagh
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2019, 59 (01): : 3 - 15
  • [49] EFFECT OF STRAIN RATE ON DYNAMIC DEFORMATION BEHAVIOR OF LASER WELDED DP780 STEEL JOINTS
    Dong Danyang
    Liu Yang
    Wang Lei
    Yang Yuling
    Li Jinfeng
    Jin Mengmeng
    ACTA METALLURGICA SINICA, 2013, 49 (12) : 1493 - 1500
  • [50] Hydroforming performance of DP590/DP780 high-strength steel tube
    Cui Z.-N.
    Lin L.
    Zhu G.-M.
    Kang Y.-L.
    Liu R.-D.
    Tian P.
    Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2020, 42 (02): : 233 - 241
12345