Development of plate and seam welding technology for X120 linepipe

被引：0

作者：

Asahi, H ^{[1
]}

Hara, T ^{[1
]}

Sugiyama, M ^{[1
]}

Maruyama, N ^{[1
]}

Terada, Y ^{[1
]}

Tamehiro, H ^{[1
]}

Koyama, K ^{[1
]}

Ohkita, S ^{[1
]}

Morimoto, H ^{[1
]}

Tomioka, K ^{[1
]}

Doi, N ^{[1
]}

Murata, M ^{[1
]}

Ayukawa, N ^{[1
]}

Akasaki, H ^{[1
]}

Fairchild, DP ^{[1
]}

Macia, ML ^{[1
]}

Petersen, CW ^{[1
]}

Koo, JY ^{[1
]}

Bangaru, NV ^{[1
]}

Luton, MJ ^{[1
]}

机构：

[1] Nippon Steel Corp Ltd, Tech Dev Bur, Futtsu, Chiba, Japan

来源：

PROCEEDINGS OF THE THIRTEENTH (2003) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 4 | 2003年

关键词：

high strength linepipe; UOE linepipe; long distance pipeline; boron steel; lower bainite; low carbon steel; cold cracking;

D O I：

暂无

中图分类号：

U6 [水路运输]; P75 [海洋工程];

学科分类号：

0814 ; 081505 ; 0824 ; 082401 ;

摘要：

To provide a lower cost option for long distance gas transmission, X120 UOE linepipe has been developed. An interrupted direct quench (IDQ) process and boron additions were employed on a low alloy steel to obtain a lower bainite microstructure with extremely small austenite grains. Plates of up to 20 mm thickness are possible with at least 231 J of Charpy energy at -30degreesC. For longitudinal seam welding, a new wire and a new flux were developed. HAZ softening is limited by using a low heat input welding procedure. HAZ cold cracking resistance is excellent due to the low carbon content and Pcm relative to the X120 strength level.

引用

页码：19 / 25

页数：7

共 50 条

[21] X120管线钢调质工艺研究
姜金星
郑宏伟
武会宾
杨柳
热加工工艺, 2012, 41 (22) : 180 - 182+190
[22] Ultra high strength linepipe X100-X120
Nobuyuki, Ishikawa
Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 2009, 78 (06): : 31 - 35
[23] Automation Technology in Welding Seam Welding Machining Design
LEI Dongyue
InternationalJournalofPlantEngineeringandManagement, 2023, 28 (03) : 129 - 144
[24] X120管线钢焊接试验及分析
杜伟
娄琦
王长安
杨专钊
焊管, 2011, 34 (01) : 25 - 29
[25] Austenite grain growth behavior of X120 pipeline steel
Qi L.
Peng K.
Cai W.
Feng X.
1600, Cailiao Daobaoshe/ Materials Review (30): : 137 - 140
[26] Synergistic Erosion-Corrosion Behavior of API X120 Steel
Paul, Okonkwo C.
Shakoor, R. A.
Mohamed, A. M. A.
MATERIALS TODAY-PROCEEDINGS, 2020, 32 : 37 - 43
[27] Seam Tracking Technology for Hyperbaric Underwater Welding
JIAO Xiangdong
Chinese Journal of Mechanical Engineering, 2009, 22 (02) : 265 - 269
[28] Seam Tracking Technology for Hyperbaric Underwater Welding
Jiao Xiangdong
Yang Yongyong
Zhou Canfeng
CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2009, 22 (02) : 265 - 269
[29] CONTINUOUS SEAM WELDING DEVELOPMENT.
Anon
Robotics World, 1984, 2 (04): : 30 - 31
[30] X120管线钢的试制及其相变规律
郑跃强
唐兴昌
李积鹏
王云平
钢铁研究学报, 2015, 27 (02) : 45 - 49

← 1 2 3 4 5 →