Effect of Severe Plastic Deformation on Structure Refinement and Mechanical Properties of the Al-Zn-Mg-Fe-Ni Alloy

被引:3
|
作者
Brodova, Irina [1 ]
Rasposienko, Dmitriy [1 ]
Shirinkina, Irina [1 ]
Petrova, Anastasia [1 ]
Akopyan, Torgom [2 ]
Bobruk, Elena [3 ,4 ]
机构
[1] Russian Acad Sci, Mikheev Inst Met Phys, Ural Branch, Ekaterinburg 620108, Russia
[2] Natl Univ Sci & Technol MISiS, Met Forming Dept, Moscow 119991, Russia
[3] Ufa State Aviat Tech Univ, Inst Phys Adv Mat, Ufa 450008, Russia
[4] St Petersburg State Univ, Lab Mech Bulk Nanostruct Mat, St Petersburg 198504, Russia
关键词
Al-Zn-Mg alloy; nanomaterials; nanocomposite; high pressure torsion; fragmentation; dynamic recrystallization; hardening; MgZn2; Al2Mg3Zn3; Al3Zr; tensile test; transmission electron microscopy;
D O I
10.3390/met11020296
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper identifies the mechanisms of phase and structural transformations during severe plastic deformation by shearing under pressure (high-pressure torsion) of an Al-Zn-Mg-Fe-Ni-based aluminum alloy depending on different initial states of the material (an ingot after homogenizing annealing and a rod produced by radial-shear rolling). Scanning and transmission electron microscopy are used to determine the morphological and size characteristics of the structural constituents of the alloy after high-pressure torsion. It has been found that, irrespective of the history under high-pressure torsion, fragmentation and dynamic recrystallization results in a nanostructural alloy with a high microhardness of 2000 to 2600 MPa. Combined deformation processing (high-pressure torsion + radial-shear rolling) is shown to yield a nanocomposite reinforced with dispersed intermetallic phases of different origins, namely Al9FeNi eutectic aluminides and MgZn2, Al2Mg3Zn3, and Al3Zr secondary phases. The results of uniaxial tensile testing demonstrate good mechanical properties of the composite (ultimate tensile strength of 640 MPa, tensile yield strength of 628 MPa, and elongation of 5%).
引用
收藏
页码:1 / 16
页数:16
相关论文
共 50 条
  • [41] THE EFFECT OF SEVERE PLASTIC DEFORMATION ON THE MECHANICAL PROPERTIES AND STRUCTURE OF BRASS
    Michalski, Jakub
    Till, Jakub
    Petru, Jana
    Spalek, Frantisek
    Rusz, Stanislav
    Svec, Jiri
    27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018), 2018, : 419 - 425
  • [42] PLASTICAL DEFORMATION INFLUENCE ON STRUCTURE TRANSFORMATIONS AND MECHANICAL-PROPERTIES OF AL-ZN-MG ALLOY
    ROMANOVA, RR
    BARANOVSKIY, AN
    PUSHIN, VG
    BUYNOV, NN
    FIZIKA METALLOV I METALLOVEDENIE, 1979, 48 (03): : 580 - 587
  • [43] Effects of Severe Plastic Deformation and Ultrasonic Treatment on the Structure, Strength, and Corrosion Resistance of Mg-Al-Zn Alloy
    Aksenov, Denis A.
    Nazarov, Ayrat A.
    Raab, Georgiy, I
    Raab, Arseniy G.
    Fakhretdinova, Elvira, I
    Asfandiyarov, Rashid N.
    Shishkunova, Maria A.
    Sementeeva, Yulia R.
    MATERIALS, 2022, 15 (20)
  • [44] Evolution of Tribological Properties of Cast Al-10Zn-2Mg Alloy Subjected to Severe Plastic Deformation
    Manjunath, G. K.
    Kumar, G. V. Preetham
    Bhat, K. Udaya
    STRUCTURAL INTEGRITY ASSESSMENT, ICONS 2018, 2020, : 165 - 175
  • [45] The effect of severe plastic deformation on precipitation in supersaturated Al-Zn-Mg alloys
    Gubicza, J.
    Schiller, I.
    Chinh, N. Q.
    Illy, J.
    Horita, Z.
    Langdon, T. G.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 460 : 77 - 85
  • [46] Effect of surface plastic deformation on hydrogen embrittlement in Al-Zn-Mg alloy
    Okimoto, Kento
    Manaka, Toshiaki
    Keikinzoku/Journal of Japan Institute of Light Metals, 2024, 74 (12): : 527 - 534
  • [47] Effect of Severe Plastic Deformation on Mechanical Properties of Fe-Ni-Mn High Strength Steel
    Shirazi, H.
    Nili-Ahmadabadi, M.
    Fatehi, A.
    Nedjad, S. Hossein
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2010, 83-86 : 16 - +
  • [48] Effect of severe plastic deformation on the microstructure and mechanical properties of Al and Cu
    Kurzydlowski, KJ
    Garbacz, H
    Richert, M
    REVIEWS ON ADVANCED MATERIALS SCIENCE, 2004, 8 (02) : 129 - 133
  • [49] Effect of mechanical coating with Ni and Ni–5% Al on the structure and electrochemical properties of the Mg–50% Ni alloy
    Sydney Ferreira Santos
    José Fernando R. de Castro
    Tomaz T. Ishikawa
    Edson A. Ticianelli
    Journal of Materials Science, 2008, 43 : 2889 - 2894
  • [50] Influence of severe plastic deformation on the PLC effect and mechanical properties in Al 5XXX alloy
    Zdunek, Joanna
    Widlicki, Pawel
    Garbacz, Halina
    Mizera, Jaroslaw
    Kurzydlowski, Krzysztof J.
    HIGH PRESSURE TECHNOLOGY OF NANOMATERIALS, 2006, 114 : 171 - 176