Characteristics of hydriding and hydrogen embrittlement of the Ti-Al-Zr alloy

被引：11
|
作者：
Kim, TK [1 ]
Baek, JH [1 ]
Choi, BS [1 ]
Jeong, YH [1 ]
Lee, DJ [1 ]
Chang, MH [1 ]
机构：
[1] Korea Atom Energy Res Inst, Taejon 305600, South Korea
来源：
ANNALS OF NUCLEAR ENERGY | 2002年 / 29卷 / 17期
关键词：
D O I：
10.1016/S0306-4549(02)00027-0
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
The characteristics of hydriding and hydrogen embrittlement of the Ti-Al-Zr alloy were evaluated. The amount of hydrogen absorbed into the alloy at 500 degreesC was continuously monitored using a hydrogen pressure measurement. The rate of decrease in hydrogen pressure indicated a high absorption rate of hydrogen into the alloy, following a linear rate law. X-ray diffraction studies showed the formation of delta-phase titanium hydride (TiH1.97) after hydriding. At room temperature, the alloy showed much sensitivity to embrittlement in ductility by hydrogen. The delta-hydrides in the grain boundaries promoted the crack propagation in the presence of stress, leading to the cleavage failure mode. However, the tensile strengths were almost independent of the hydrogen content up to 1174 ppm. It is thus concluded that the delta-hydride acts to decrease the ductility without affecting tensile strengths. (C) 2002 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：2041 / 2053
页数：13
相关论文
共 50 条
  • [21] ELECTRICAL-PROPERTIES OF TI-AL-ZR ALLOYS
    KALININ, GP
    ELYUTIN, OP
    DORONINA, EV
    RUSSIAN METALLURGY, 1976, (05): : 188 - 191
  • [22] Microstructure and high temperature oxidation resistance property of packing Al cementation on Ti-Al-Zr alloy
    Tian, H.
    Zhou, K.
    Zou, Y. C.
    Cai, H.
    Wang, Y. M.
    Ouyang, J. H.
    Li, X. W.
    SURFACE & COATINGS TECHNOLOGY, 2019, 374 : 1051 - 1058
  • [23] Microstructures and hydrogen embrittlement of Ti-49Al alloy
    Gao, KW
    Nakamura, M
    INTERMETALLICS, 2000, 8 (5-6) : 595 - 597
  • [24] Rapid dendrite growth and corrosion mechanism of Ti-Al-Zr alloy by electromagnetic levitation processing
    Xiao R.-L.
    Sun C.-H.
    Liu K.-L.
    Ruan Y.
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2023, 33 (12): : 4059 - 4069
  • [25] Influence of Oxygen-Enriched Layer on the Passivity of Ti-Al-Zr Alloy in an Alkaline Environment
    Sinha, Prafful Kumar
    Kain, Vivekanand
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2021, 168 (09)
  • [26] Effect of Isothermal Heat Treatment at 760 °C on the Oxidation Behavior of Ti-Al-Zr Alloy
    Prafful Kumar Sinha
    Vivekanand Kain
    Metallurgical and Materials Transactions A, 2020, 51 : 6768 - 6783
  • [27] Role of tantalum and nickel ion implantation on corrosion resistance properties of a Ti-Al-Zr alloy
    Liu, Y. Z.
    Zu, X. T.
    Tang, R.
    Xiang, X.
    Wang, L.
    Ma, W. G.
    SURFACE & COATINGS TECHNOLOGY, 2007, 201 (16-17): : 7538 - 7543
  • [28] Phase formation in nitrogen ion implanted Ti-Al-Zr alloy and modification of corrosion property
    Liu, YZ
    Zu, XT
    Cao, J
    Wang, L
    Li, C
    Huang, XQ
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2005, 237 (3-4): : 543 - 549
  • [29] Oxidation resistance of SiO2 bonded coating formed on Ti-Al-Zr alloy
    Tian, H.
    Wang, Y. M.
    Guo, L. X.
    Ouyang, J. H.
    Zhou, Y.
    Jia, D. C.
    SURFACE ENGINEERING, 2014, 30 (03) : 204 - 211
  • [30] Effect of Isothermal Heat Treatment at 760 °C on the Oxidation Behavior of Ti-Al-Zr Alloy
    Sinha, Prafful Kumar
    Kain, Vivekanand
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (12): : 6768 - 6783
12345