Ion irradiation studies on the void swelling behavior of a titanium modified D9 alloy

被引:4
|
作者
Balaji, S. [1 ]
Mohan, Sruthi [1 ]
Amirthapandian, S. [1 ]
Chinnathambi, S. [1 ]
David, C. [1 ]
Panigrahi, B. K. [1 ]
机构
[1] Indira Gandhi Ctr Atom Res, Mat Sci Grp, Madras 603102, Tamil Nadu, India
关键词
DELAYED HYDRIDE CRACKING; ZIRCONIUM; TEMPERATURE; FABRICATION; MISFIT; TIP;
D O I
10.1016/j.jnucmat.2015.09.052
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The sensitivity of Positron Annihilation Spectroscopy (PAS) for probing vacancy defects and their environment is well known. Its applicability in determination of swelling and the peak swelling temperature was put to test in our earlier work on ion irradiated D9 alloys [1]. Upon comparison with the peak swelling temperature determined by conventional step height measurements it was found that the peak swelling temperature determined using PAS was 50 K higher. It was conjectured that the positrons trapping in the irradiation induced TiC precipitation could have caused the shift. In the present work, D9 alloys have been implanted with 100 appm helium ions and subsequently implanted with 2.5 MeV Ni ions up to peak damage of 100 dpa. The nickel implantations have been carried out through a range of temperatures between 450 degrees C and 650 degrees C. The evolution of cavities and TiC precipitates at various temperatures has been followed by TEM and this report provides an experimental verification of the conjecture. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码:368 / 382
页数:15
相关论文
共 50 条
  • [41] VOID SWELLING AND PHASE INSTABILITY IN HEAVY-ION IRRADIATED MO-ZR ALLOY
    LIOU, KY
    WILKES, P
    KULCINSKI, GL
    BILLEN, JH
    JOURNAL OF NUCLEAR MATERIALS, 1979, 85-6 (DEC) : 735 - 738
  • [42] Ion irradiation-induced swelling and hardening effect of Hastelloy N alloy
    Zhang, S. J.
    Li, D. H.
    Chen, H. C.
    Lei, G. H.
    Huang, H. F.
    Zhang, W.
    Wang, C. B.
    Yan, L.
    Fu, D. J.
    Tang, M.
    JOURNAL OF NUCLEAR MATERIALS, 2017, 489 : 180 - 186
  • [43] JAHN-TELLER QUADRATIC EFFECT ON AN ION WITH D9 CONFIGURATION IN A FLUORINE STRUCTURE
    LACROIX, R
    HELVETICA PHYSICA ACTA, 1974, 47 (06): : 689 - 704
  • [44] SWELLING STUDIES OF VANADIUM AND A VANADIUM-1 WT PERCENT TITANIUM-ALLOY USING ION SIMULATION TECHNIQUES
    SANTHANAM, AT
    TAYLOR, A
    KESTEL, BJ
    STEVES, C
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY, 1975, 12 (01): : 528 - 531
  • [45] OBSERVATIONS OF VOID SWELLING IN SELECTED AUSTENITIC ALLOYS DURING ION IRRADIATION UNDER A RISING TEMPERATURE RAMP
    MAZEY, DJ
    WILLIAMS, TM
    BOLSTER, DEJ
    JOURNAL OF NUCLEAR MATERIALS, 1988, 154 (2-3) : 186 - 200
  • [46] Evaluation of self-welding susceptibility of an austenitic stainless steel (alloy D9) in sodium
    Kumar, Hemant
    Albert, S. K.
    Ramakrishnan, V.
    Meikandamurthy, C.
    Amarendra, G.
    Bhaduri, A. K.
    JOURNAL OF NUCLEAR MATERIALS, 2008, 374 (1-2) : 1 - 8
  • [47] Thermal creep properties of alloy D9 fuel clad tubes of fast breeder reactor
    Latha, S
    Mathew, MD
    Rao, KBS
    Mannan, SL
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2005, 58 (2-3): : 343 - 346
  • [48] Effect of laser shock peening on the microstructure, tensile and heat transport properties of Alloy D9
    Sundar R.
    Sudha C.
    Rai A.K.
    Ganesh P.
    Kolhatkar A.
    Murugesan S.
    Karthik V.
    Biswal R.
    Raju S.
    Ranganathan K.
    Kaul R.
    Bindra K.S.
    Lasers in Manufacturing and Materials Processing, 2020, 7 (03) : 259 - 277
  • [49] Comparison of void swelling of ferritic-martensitic and ferritic HT9 alloys after high-dose self-ion irradiation
    Kim, Hyosim
    Gigax, Jonathan G.
    El-Atwani, Osman
    Chancey, Matthew R.
    Baldwin, Jon K.
    Wang, Yongqiang
    Maloy, Stuart A.
    MATERIALS CHARACTERIZATION, 2021, 173
  • [50] The correlation between microstructure and nanoindentation property of neutron-irradiated austenitic alloy D9
    Chen, Tianyi
    He, Lingfeng
    Cullison, Mack H.
    Hay, Charles
    Burns, Jatuporn
    Wu, Yaqiao
    Tan, Lizhen
    ACTA MATERIALIA, 2020, 195 : 433 - 445