Transient Liquid-Phase Sintering Characteristic of W-Ni-Fe Alloy via Microwave-Assisted Heating

被引：1
|
作者：
Ma Yunzhu [1 ]
Zhang Jiajia [1 ]
Liu Wensheng [1 ]
Zhao Yaxu [1 ]
机构：
[1] Cent South Univ, State Key Lab Powder Met, Changsha 410083, Hunan, Peoples R China
来源：
RARE METAL MATERIALS AND ENGINEERING | 2014年 / 43卷 / 09期
基金：
中国国家自然科学基金;
关键词：
W-Ni-Fe alloy; microwave-assisted heating; transient liquid phase sintering; mechanical property; MECHANICAL PERFORMANCE;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The transient liquid-phase densification behavior and the mechanical performance of W-Ni-Fe alloy were investigated. This results show that the excellent mechanical properties and the quick densification of 93W-Ni-Fe alloy can be obtained via the microwave-assisted sintering approach in a 2.45 GHz microwave furnace. The tensile strength, the elongation, the relative density and the hardness (HRC) of samples are 1200 MPa, 16.6%, 98.6% and 42.0, respectively after the compacts are sintered at 1500 degrees C for only 5 min. The compacts can be successfully sintered in a microwave furnace with above 80% reduction in the overall processing time. Transient liquid-phase sintering by microwave-assisted heating is beneficial to saving of a lot of sintering time and accelerating of densification process, which results in W grains refinement, homogeneous microstructure and high comprehensive performances of W-Ni-Fe alloy.
引用
收藏
页码：2108 / 2111
页数：4
相关论文
共 50 条
  • [21] APPROACHES TO IMPROVE MECHANICAL-PROPERTIES OF LIQUID-PHASE SINTERED W-NI-FE HEAVY ALLOYS
    ZUBILLAGA, C
    CASTRO, F
    URCOLA, JJ
    FUENTES, M
    ZEITSCHRIFT FUR METALLKUNDE, 1989, 80 (08): : 577 - 586
  • [22] Sintering High Tungsten Content W-Ni-Fe Heavy Alloys by Microwave Radiation
    Zhou, Chengshang
    Yi, Jianhong
    Luo, Shudong
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (01): : 455 - 463
  • [23] Sintering High Tungsten Content W-Ni-Fe Heavy Alloys by Microwave Radiation
    Chengshang Zhou
    Jianhong Yi
    Shudong Luo
    Metallurgical and Materials Transactions A, 2014, 45 : 455 - 463
  • [24] Shrinkage kinetics during sintering W-Ni-Fe heavy alloy with ultrafine grain
    Wang, Jun
    Zhang, Liying
    Guo, Zhimeng
    Lin, Tao
    Wu, Chengyi
    Wu, Qinghua
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2002, 24 (02):
  • [25] TRANSIENT LIQUID-PHASE SINTERING OF CU-AL ALLOY
    LEE, DJ
    YOON, DN
    POWDER METALLURGY INTERNATIONAL, 1988, 20 (05): : 15 - 17
  • [26] LIQUID-PHASE SINTERING OF MODEL SYSTEM W-NI
    HUPPMANN, WJ
    RIEGGER, H
    INTERNATIONAL JOURNAL OF POWDER METALLURGY, 1977, 13 (04): : 243 - 247
  • [27] CHEMICALLY INDUCED MIGRATION OF LIQUID FILM IN W-Ni-Fe ALLOY.
    Song, Young-Duh
    Ahn, Sung-Tae
    Yoon, Duk N.
    1907, (33):
  • [28] Effect of Fe7W6 Phase (μ-phase) on Mechanical Properties of W-Ni-Fe Heavy Alloy
    Jeon, Yong Jin
    Kim, Se Hoon
    Kim, Young Do
    KOREAN JOURNAL OF METALS AND MATERIALS, 2011, 49 (09): : 720 - 725
  • [29] TRANSIENT LIQUID-PHASE SINTERING IN THE FE-FE2TI SYSTEM
    BAEK, WH
    GERMAN, RM
    INTERNATIONAL JOURNAL OF POWDER METALLURGY, 1986, 22 (04): : 235 - &
  • [30] Compaction Kinetics with Liquid-Phase Sintering of W – Ni – Sn Pseudoalloys
    Valentin I. Nizhenko
    Valerii V. Skorokhod
    Powder Metallurgy and Metal Ceramics, 2004, 43 : 364 - 370
12345