A thermal model for N series connected glass/cell/polymer sheet and glass/cell/glass crystalline silicon photovoltaic modules with hot solar cells connected in series and its thermal losses in real outdoor condition

被引：12

作者：

Rajput, Pramod ^{[1
]}

Shyam ^{[2
]}

Tomar, Vivek ^{[1
]}

Tiwari, G. N. ^{[1
,3
]}

Sastry, O. S. ^{[4
,5
]}

Bhatti, T. S. ^{[1
]}

机构：

[1] Indian Inst Technol Delhi, Ctr Energy Studies, New Delhi 110016, India

[2] Univ Savoie Mt Blanc, LOCIE UMR CNRS 5271, Campus Sci Savoie Technolac,Batiment Helios, F-73376 Le Bourget Du Lac, France

[3] BERS, SODHA BERS COMPLEX,Plot 51, Varanasi, Uttar Pradesh, India

[4] Interim Secretariat ISA, Surya Bhawan 3rdFloor, Gurugram, Haryana, India

[5] Minist New & Renewable Energy, New Delhi 110003, India

来源：

RENEWABLE ENERGY | 2018年 / 126卷

关键词：

PV module; Glass/cell/polymer sheet; Glass/cell/glass; IR thermography; Hot solar cell; Thermal model; PV MODULES; TEMPERATURE; STAGE;

D O I：

10.1016/j.renene.2018.03.040

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

The importance of reliability and degradation of photovoltaic (PV) systems as a renewable energy resource is well recognized. In the present study, a thermal model has been developed to estimate the temperature, efficiency and thermal losses for N series connected Glass/cell/polymer sheet and Glass/cell/glass PV modules with hot solar cells in terms of climate and design parameters. The numerical computation has been performed for larger number of days as June (summer) and December (winter) following the temperature of hot solar cells at the National Institute of Solar Energy, Gurugram, India. In the case of string 1 (3 hot solar cells) of Glass/cell/polymer sheet has higher short circuit current than the Glass/cell/glass PV modules string 2 (7 hot solar cells). Similarly, leakage current of Glass/cell/polymer sheet PV module with 7 hot solar cells is marginally higher in comparison to Glass/cell/polymer sheet PV module with 3 hot solar cells. Further, 1% electrical efficiency has been improved due to shadow on hot solar cells in Glass/cell/polymer sheet and Glass/cell/glass PV modules. (C) 2018 Elsevier Ltd. All rights reserved.

引用

页码：370 / 386

页数：17

共 5 条

[1] Thermal modelling and experimental validation of hot spot in crystalline silicon photovoltaic modules for real outdoor condition
Rajput, Pramod
Tiwari, G. N.
Sastry, O. S.
SOLAR ENERGY, 2016, 139 : 569 - 580
[2] Energy matrices evaluation and exergoeconomic analysis of series connected N partially covered (glass to glass PV module) concentrated photovoltaic thermal collector: At constant flow rate mode
Tripathi, Rohit
Tiwari, G. N.
Dwivedi, V. K.
ENERGY CONVERSION AND MANAGEMENT, 2017, 145 : 353 - 370
[3] Electrical and thermal energy assessment of series connected N partially covered photovoltaic thermal (PVT)-compound parabolic concentrator (CPC) collector for different solar cell materials
Saini, Vineet
Tripathi, Rohit
Tiwari, G. N.
Al-Helal, I. M.
APPLIED THERMAL ENGINEERING, 2018, 128 : 1611 - 1623
[4] Investigating polysilicon thin film structural changes during rapid thermal annealing of a thin film crystalline silicon on glass solar cell
Ian Brazil
Martin A. Green
Journal of Materials Science: Materials in Electronics, 2010, 21 : 994 - 999
[5] Investigating polysilicon thin film structural changes during rapid thermal annealing of a thin film crystalline silicon on glass solar cell
Brazil, Ian
Green, Martin A.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2010, 21 (10) : 994 - 999

← 1 →