Neutronic analysis of hydride fueled PWR cores

The neutronic properties of U-ZrH(1.6) fuelled PWR cores are investigated and compared against those of the currently used UO(2) fuelled cores. In the first part of this work a parametric study is performed to quantify the neutronically achievable burnup for both hydride and oxide fuels at a number of enrichment levels and fora large number of geometries covering a wide design space of fuel rod outer diameter, D, and lattice pitch, P. The fuel temperature and coolant temperature reactivity coefficients as well as the small and large void reactivity coefficients are calculated for hydride fuel with 5% and 12.5% enriched uranium. For this purpose a simplified procedure was developed that can, using single unit cell or assembly calculations, (1) account for non-linear burnup dependent k(infinity) and thus to adequately predict the discharge burnup; (2) estimate the burnup dependent soluble boron concentration and: (3) estimate the reactivity coefficients; all of the above for a multi-batch core. In the second part of this work a detailed neutronic analysis is carried out for the six most economical geometries of both oxide and hydride fuels, with the purpose of designing the U-ZrH(1.6) fueled PWR cores to have negative reactivity coefficients. The preferred design found is replacement of 25 v/o of the ZrH(1.6) by thorium hydride, along with addition of some IFBA burnable poison. It is also found that the conversion from oxide to hydride fueled PWR cores could be done without modifications in the control system. (C) 2009 Elsevier B.V. All rights reserved.