PID pitch attitude control for unstable flight vehicle in the presence of actuator delay: Tuning and analysis

被引:9
|
作者
Sun, Mingwei [1 ]
Zhang, Limin [1 ]
Wang, Zenghui [2 ]
Chen, Zenqiang [1 ]
机构
[1] Nankai Univ, Coll Comp & Control Engn, Dept Automat, Tianjin 300071, Peoples R China
[2] Univ South Africa, Dept Elect & Min Engn, ZA-1710 Florida, South Africa
基金
新加坡国家研究基金会; 中国国家自然科学基金;
关键词
PHASE-MARGIN SPECIFICATIONS; RATE-SATURATING ACTUATORS; CONTROL DESIGN; GAIN; ROBUST; STABILITY; SYSTEM;
D O I
10.1016/j.jfranklin.2014.09.013
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
In the realm of flight control, proportional-integral-derivative (PID) control is still widely used in practice due to its simple structure and efficiency. The robustness and dynamic performance of PID controller can be evaluated by stability margins. Based on the empirical knowledge about the unstable flight dynamics, the analytical tuning formulas of the PID pitch attitude control with actuator delay are derived with the help of several proper approximations. These tuning formulas can meet the increasing gain and phase margins (iGPM) requirement and avoid time-consuming trial-and-error tuning process. The feasible iGPM area is established in 2-D plane subject to several conditions, especially taking the decreasing gain margin into account, wherein the numerical polynomial solving approaches are employed. The relationship between an existing PD tuning scheme and the proposed PID tuning method is also revealed. The applicable area of the tuning rule is then investigated on the basis of a crucial assumption. Furthermore, the achievable decreasing gain and phase margins (dGPM) area is obtained when the decreasing gain margin is critical; and another tuning rule is derived according to the dGPM specifications. The effect of the actuator delay on the achievable GPM area is demonstrated in a straightforward manner such that the reasonable criteria can be specified. Finally two numerical paradigms are presented to validate the proposed method; and the robustness and dynamic performance of the PID control are also reexamined for unstable flight dynamics. (C) 2014 The Franklin Institute. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:5523 / 5547
页数:25
相关论文
共 50 条
  • [1] Stability margin-based PD attitude control tuning for unstable flight vehicle
    Sun, Mingwei
    Yang, Ruiguang
    Wang, Zenghui
    Chen, Zengqiang
    INTERNATIONAL JOURNAL OF SYSTEMS SCIENCE, 2013, 44 (02) : 240 - 251
  • [2] Stochastic precision analysis of hypersonic flight vehicle attitude control system in the presence of uncertainties
    Jiang, Ruimin
    Zhou, Jun
    Guo, Jianguo
    SYSTEMS SCIENCE & CONTROL ENGINEERING, 2020, 8 (01) : 277 - 287
  • [3] TUNING OF PID CONTROLLERS FOR TIME DELAY UNSTABLE SYSTEMS WITH TWO UNSTABLE POLES
    Nikita, Saxena
    Chidambaram, M.
    IFAC PAPERSONLINE, 2016, 49 (01): : 801 - 806
  • [4] PID Tuning for the pitch angle of a Two-Wheeled Vehicle
    Souza, M. R. S. B.
    Murofushi, R. H.
    Tavares, J. J. P. Z.
    Ribeiro, J. F.
    2015 12TH LATIN AMERICAN ROBOTICS SYMPOSIUM AND 2015 3RD BRAZILIAN SYMPOSIUM ON ROBOTICS (LARS-SBR), 2015, : 371 - 375
  • [5] PID controller tuning for integrating and unstable processes with time delay
    Lee, Y
    Lee, J
    Park, S
    CHEMICAL ENGINEERING SCIENCE, 2000, 55 (17) : 3481 - 3493
  • [6] PID control of unstable time delay systems
    Valentine, CC
    Chidambaram, M
    CHEMICAL ENGINEERING COMMUNICATIONS, 1997, 162 : 63 - 74
  • [7] PID Tuning for Unstable Processes with Time Delay Based on Gain Margin
    Gerov, Radmila
    Jovanovic, Zoran
    2018 IEEE 12TH INTERNATIONAL SYMPOSIUM ON APPLIED COMPUTATIONAL INTELLIGENCE AND INFORMATICS (SACI), 2018, : 561 - 566
  • [8] IMC PID controller tuning for stable and unstable processes with time delay
    Wang, Qing
    Lu, Changhou
    Pan, Wei
    CHEMICAL ENGINEERING RESEARCH & DESIGN, 2016, 105 : 120 - 129
  • [10] PID Control for Formation Flight in Presence of Disturbance
    Yean, Rebbecca Thien Tze
    Kim, Yoonsoo
    2017 17TH INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND SYSTEMS (ICCAS), 2017, : 1059 - 1061