Stiffness Analysis of Steel Plate with a Rectangular Cut out Bonded by Composite Patch

被引：0
|
作者：
Zhang, Xiang Ming [1 ]
You, Ze Long [2 ]
Du, Kui [3 ]
机构：
[1] Naval Engn Univ, Coll Sci, Wuhan, Peoples R China
[2] Naval Engn Univ, Wuhan, Peoples R China
[3] Naval Engn Univ, Off Res Dev, Wuhan, Peoples R China
来源：
ADVANCES ON MATERIALS ENGINEERING | 2013年 / 377卷
关键词：
Relative stiffness; Rectangular; Composite; Bonding; Mechanical property; Analytical solution;
D O I：
10.4028/www.scientific.net/AMM.377.8
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Based on the features of steel plate with a rectangular cut out bonded by composite patch, a three-dimensional mechanical model for stiffness analysis was developed. The relative stiffness of steel plate with a rectangular cutout before and after bonded composite patches versus intact plate is introduced and investigated. The results indicate that the relative stiffness of the patched plate increases with the patch thickness increasing, but the performance can not be effectively improved depending upon adding patch thickness alone, when patch thickness is more than five layers. The analytical solutions, when patch more than the 4 layers, are in good agreement with the finite element simulations.
引用
收藏
页码：8 / +
页数：2
相关论文
共 50 条
  • [21] Investigation of Free Vibration Examination of Rectangular Overlaid Plate without Cut-out
    Sharma, Vinamra
    Tiwari, Manish
    Dubey, Satyendra
    Khare, Arun
    Dubey, Nitesh
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS AND STRUCTURES FOR CIVIL INFRASTRUCTURES (SMSCI2019), 2019, 2158
  • [22] An Analysis of Interfacial Stresses in Steel Beams Bonded With a Thin Composite Plate Under Thermomechanical Loading
    Benyoucef, S.
    Tounsi, A.
    Yeghnem, R.
    Bouiadjra, M. Bachir
    Bedia, E. A. Adda
    MECHANICS OF COMPOSITE MATERIALS, 2014, 49 (06) : 641 - 650
  • [23] An Analysis of Interfacial Stresses in Steel Beams Bonded With a Thin Composite Plate Under Thermomechanical Loading
    S. Benyoucef
    A. Tounsi
    R. Yeghnem
    M. Bachir Bouiadjra
    E. A. Adda Bedia
    Mechanics of Composite Materials, 2014, 49 : 641 - 650
  • [24] Analysis of mechanical performance of continuous steel beams with variable section bonded by a prestressed composite plate
    Daouadji, Tahar Hassaine
    Abderezak, Rabahi
    Rabia, Benferhat
    STEEL AND COMPOSITE STRUCTURES, 2024, 50 (02): : 183 - 199
  • [25] Rehabilitation of Strength of Steel Plate with a Corroding Hole Bonded by Composite Patches
    Zhang, Xiang Ming
    Chen, Li Wei
    Yu, Ze Long
    Hu, Ming Yong
    Yang, Shao Hong
    VIBRATION, STRUCTURAL ENGINEERING AND MEASUREMENT II, PTS 1-3, 2012, 226-228 : 883 - +
  • [26] Dynamic instability analysis of variable angle tow composite plate with delamination around a cut-out
    Samukham, Surya
    Raju, Gangadharan
    Wu, Zhangming
    Vyasarayani, C. P.
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2019, 26 (01) : 62 - 70
  • [27] Free Vibration Analysis of Laminated Composite Plate with Cut-Out Carrying Concentrated and Distributed Mass
    Pal S.
    Bose C.
    Haldar S.
    Journal of The Institution of Engineers (India): Series C, 2021, 102 (06): : 1447 - 1460
  • [28] EFFECT OF BONDED COMPOSITE PATCH ON THE STRESS INTENSITY FACTOR FOR A CENTER-CRACKED PLATE
    Aabid, Abdul
    Hrairi, Meftah
    Ali, Jaffar Syed Mohamed
    Abuzaid, Ahmed
    IIUM ENGINEERING JOURNAL, 2019, 20 (02): : 211 - 221
  • [29] Nonlinear analysis of a composite panel with a cutout repaired by a bonded tapered composite patch
    Oterkus, E
    Barut, A
    Madenci, E
    Ambur, DR
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2005, 42 (18-19) : 5274 - 5306
  • [30] Effect of Patch Thickness on the Repair Performance of Bonded Composite Repair in Cracked Aluminum Plate
    Khan, Sohail M. A.
    Essaheb, Mahir
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (08) : 9020 - 9028
12345