The microtube heat sink with tangential impingement jet and variable fluid properties

被引：17
|
作者：
Lelea, Dorin [1 ]
机构：
[1] Univ Politehn Timisoara, Fac Mech Engn, Dept Thermal Machines & Transportat, Timisoara 300222, Romania
来源：
HEAT AND MASS TRANSFER | 2009年 / 45卷 / 09期
关键词：
VISCOUS DISSIPATION; PRESSURE-DROP; MICROCHANNEL; FLOW; WATER;
D O I：
10.1007/s00231-009-0495-8
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
This paper presents the numerical investigation of the microtube heat sink with impingement jet feeding. The inlet channel covers only the quarter of the tube perimeter so the swirl flow is settled in the tubes and the heat transfer between the liquid flow and silicon substrate is improved. The water with the variable physical properties is used as the working fluid and laminar flow regime is considered. The proposed microtube heat sink with impingement jet feeding is compared with classic microtube heat sink in terms of temperature variation along the heated surface and temperature difference. The influence of the temperature dependent physical properties on the fluid flow and heat transfer is analyzed.
引用
收藏
页码：1215 / 1222
页数：8
相关论文
共 50 条
  • [21] Performance analysis and design optimization of micro-jet impingement heat sink
    Husain, Afzal
    Kim, Sun-Min
    Kim, Kwang-Yong
    HEAT AND MASS TRANSFER, 2013, 49 (11) : 1613 - 1624
  • [22] Experimental and Numerical Investigation for Hydrothermal Performance of the Jet Impingement Microchannel Heat Sink
    Pandey, Jyoti
    Ansari, Mohd. Zahid
    Husain, Afzal
    ASME JOURNAL OF HEAT AND MASS TRANSFER, 2024, 146 (07):
  • [23] Numerical simulation of heat transfer characteristics of jet impingement with a novel single cone heat sink
    Tang, Zhiguo
    Liu, Qingqing
    Li, Hai
    Min, Xiaoteng
    APPLIED THERMAL ENGINEERING, 2017, 127 : 906 - 914
  • [24] Nanofluid jet impingement heat transfer characteristics in the rectangular mini-fin heat sink
    Naphon, Paisarn
    Nakharintr, Lursukd
    Journal of Engineering Physics and Thermophysics, 2012, 85 (06) : 1432 - 1440
  • [25] Continuous nanofluids jet impingement heat transfer and flow in a micro-channel heat sink
    Naphon, P.
    Nakharintr, L.
    Wiriyasart, S.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 126 : 924 - 932
  • [26] Heat exchange enhancement of jet impingement cooling with the novel humped-cone heat sink
    Froissart, Marcin
    Ziolkowski, Pawel
    Dudda, Waldemar
    Badur, Janusz
    CASE STUDIES IN THERMAL ENGINEERING, 2021, 28
  • [27] An experimental and numerical study on heat transfer enhancement of a heat sink fin by synthetic jet impingement
    Longzhong Huang
    Taiho Yeom
    Terrence Simon
    Tianhong Cui
    Heat and Mass Transfer, 2021, 57 : 583 - 593
  • [28] An experimental and numerical study on heat transfer enhancement of a heat sink fin by synthetic jet impingement
    Huang, Longzhong
    Yeom, Taiho
    Simon, Terrence
    Cui, Tianhong
    HEAT AND MASS TRANSFER, 2021, 57 (04) : 583 - 593
  • [29] The water based Al2O3 nanofluid flow and heat transfer in tangential microtube heat sink with multiple inlets
    Lelea, Dorin
    Laza, Ioan
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2014, 69 : 264 - 275
  • [30] Jet with variable fluid properties: Free jet and dissipative jet
    Patel, Manisha
    Timol, M. G.
    INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 2016, 85 : 54 - 61
12345