Production of Ni-Cr-Ti-Natural Fibres Composite and Investigation of Mechanical Properties

被引：1
|
作者：
Pesmen, G. [1 ]
Erol, A. [2 ]
Yonetken, A. [3 ]
机构：
[1] Afyon Kocatepe Univ, Vocat Coll Suhut, TR-03200 Afyon, Turkey
[2] Afyon Kocatepe Univ, Fac Technol, TR-03200 Afyon, Turkey
[3] Afyon Kocatepe Univ, Fac Engn, TR-03200 Afyon, Turkey
来源：
4TH INTERNATIONAL CONGRESS IN ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE (APMAS 2014) | 2015年 / 1653卷
关键词：
Sintering; Naturel Fibres; high temperature; composite; ALLOYS;
D O I：
10.1063/1.4914278
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Intennetallic materials such as Ni2Ti, Cr2Ti are among advanced tecimology materials that have outstanding mechanical and physical properties for high temperature applications. Especially creep resistance, low density and high hardness properties stand out in such intermetallics. The microstructure, mechanical properties of (%50Ni-%48Cr-%2Ti)-%10Naturel Fibres and (%64Ni-%32Cr-%4Ti)-%10Naturel Fibres powders were investigated using specimens produced by tube furnace sintering at 1000-1200-1400 degrees C temperature. A composite consisting of ternary additions, a metallic phase, Ti,Cr and Ni have been prepared under Ar shroud and then tube furnace sintered. XRD, SEM (Scanning Electron Microscope), were investigated to characterize the properties of the specimens. Experimental results carried out for composition (%64Ni-%32Cr-%4Ti)-%10Naturel at 1400 degrees C suggest that the best properties as 112.09HV and 5,422g/cm(3) density were obtained at 1400 degrees C
引用
收藏
页数：7
相关论文
共 50 条
  • [1] Production of Co–Cr–Ti Composite and Investigation of Mechanical Properties
    Ahmet Yönetken
    Ayhan Erol
    İsmail Yildiz
    Transactions of the Indian Institute of Metals, 2014, 67 : 407 - 410
  • [2] Production of Co-Cr-Ti Composite and Investigation of Mechanical Properties
    Yonetken, Ahmet
    Erol, Ayhan
    Yildiz, Ismail
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2014, 67 (03) : 407 - 410
  • [3] Production of Ni3Al-Cr Composite and Investigation of Mechanical Properties
    Yildiz, Ismail
    Erol, Ayhan
    Yonetken, Ahmet
    GAZI UNIVERSITY JOURNAL OF SCIENCE, 2012, 25 (01): : 199 - 205
  • [4] Structure, and Mechanical and Tribological Properties of Ti–Cr–C–Ni–Fe Composite Coatings
    M. S. Antipov
    P. M. Bazhin
    A. S. Konstantinov
    A. P. Chizhikov
    A. O. Zhidovich
    A. M. Stolin
    Physical Mesomechanics, 2023, 26 : 691 - 700
  • [5] Structure, and Mechanical and Tribological Properties of Ti-Cr-C-Ni-Fe Composite Coatings
    Antipov, M. S.
    Bazhin, P. M.
    Konstantinov, A. S.
    Chizhikov, A. P.
    Zhidovich, A. O.
    Stolin, A. M.
    PHYSICAL MESOMECHANICS, 2023, 26 (06) : 691 - 700
  • [6] INVESTIGATION OF MECHANICAL PROPERTIES OF TI-MO-NI ALLOYS
    KALABUKH.SV
    MIKHEYEV, VS
    RUSSIAN METALLURGY-METALLY-USSR, 1970, (03): : 131 - &
  • [7] MICROSTRUCTURE AND MECHANICAL PROPERTIES OF(Nb,Ti)C-Ni COMPOSITE
    蔡克峰
    南策文
    袁润章
    叶能
    JournalofWuhanUniversityofTechnology-MaterialsScience, 1994, (03) : 15 - 18
  • [8] Investigation of the Mechanical Behavior of Electroless Ni-P-Ti Composite Coatings
    Li, Zhi
    Farhat, Zoheir
    Jarjoura, George
    Fayyad, Eman
    Abdullah, Aboubakr M.
    Hassan, Mohammad K.
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2020, 142 (03):
  • [9] About the characterization of the mechanical properties of natural fibres
    Mieck, KP
    Reussmann, T
    Nechwatal, A
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2003, 34 (03) : 285 - 289
  • [10] Effect of Plasma Spraying Parameters on the Properties of (Ti, Cr)C–Ni Composite Coatings
    O. P. Umanskyi
    O. Ye. Terentiev
    M. S. Storozhenko
    O. Yu. Koval
    Yu.V. Gubin
    V. P. Brazhevskyi
    O. O. Chernyshov
    Powder Metallurgy and Metal Ceramics, 2023, 61 : 597 - 604
12345