Investigation of the Circularity and Conicity of Super Alloy During Rotary Ultrasonic Machining

被引：4

作者：

Popli, Dipesh ^{[1
]}

Gupta, Meenu ^{[1
]}

机构：

[1] Natl Inst Technol, Kurukshetra 136119, Haryana, India

来源：

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING | 2019年 / 43卷 / Suppl 1期

关键词：

Conicity; Circularity; Ultrasonic; Nickel; ANOVA;

D O I：

10.1007/s40997-018-0197-2

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Manufacturing industries are moving toward super alloys owing to their unique features. In this article, the performance analysis of nickel-based super alloys has been studied on rotary ultrasonic machining (RUM) by varying the tool shapes and abrasive size of the diamond. The output quality of the machined part has been evaluated in terms of conicity and circularity of the hole. The machining process has been carried out by considering all the necessary RUM parameters like tool rotation, tool feed rate and ultrasonic power. The experimental setup validated that the lower value of conicity and circularity can be obtained at: tool rotation 4600rpm, feed rate 0.013843mm/s, ultrasonic power 60% abrasive size 140 mesh and using slotted tool. The variation in the abrasive size and the tool shapes has a significant effect on the performance of the machining.

引用

页码：809 / 829

页数：21

共 50 条

[41] Investigation on grinding force and machining quality during rotary ultrasonic grinding deep-small hole of fluorophlogopite ceramics
Guojun Dong
Liming Zhang
The International Journal of Advanced Manufacturing Technology, 2019, 104 : 2815 - 2825
[42] Rotary ultrasonic machining of CFRP: A comparison with grinding
Ning, F. D.
Cong, W. L.
Pei, Z. J.
Treadwell, C.
ULTRASONICS, 2016, 66 : 125 - 132
[43] Research on the frequency tracking in rotary ultrasonic machining
Yao, Z.
Guo, Z. N.
Zhang, Y. J.
Deng, Y.
Zhang, W. T.
PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM), 2013, 6 : 556 - 560
[44] Rotary ultrasonic machining of structural ceramics - a review
Pei, Z.J., 1600, American Ceramic Soc, Westerville, OH, United States (16):
[45] STOCHASTIC MODELING AND ANALYSIS OF ROTARY ULTRASONIC MACHINING
Wu, Jiaqing
Cong, Weilong
Williams, Robert E.
Pei, Z. J.
PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, VOL 1, 2009, : 283 - 292
[46] Advances in Rotary Ultrasonic-Assisted Machining
O’Toole L.
Kang C.
Fang F.
Nanomanufacturing and Metrology, 2020, 3 (01) : 1 - 25
[47] ROTARY ULTRASONIC MACHINING FOR FACE MILLING OF CERAMICS
PEI, ZJ
FERREIRA, PM
KAPOOR, SG
HASELKORN, M
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1995, 35 (07): : 1033 - 1046
[48] Development trends of rotary ultrasonic machining technology
Zheng, Shuyou
Feng, Pingfa
Xu, Xipeng
Qinghua Daxue Xuebao/Journal of Tsinghua University, 2009, 49 (11): : 1799 - 1804
[49] Investigation of Micro Hole Drilling in Bovine Rib Using Micro Rotary Ultrasonic Machining
Sarwade, A.
Sundarann, M. M.
Rajurkar, K. P.
PROCEEDINGS OF THE 16TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2010, 2010, : 411 - 416
[50] Rotary Ultrasonic Machining of Alumina Ceramic: An Experimental Investigation of Tool Path and Tool Overlapping
Abdo, Basem M. A.
El-Tamimi, Abdualziz
Nasr, Emad Abouel
APPLIED SCIENCES-BASEL, 2020, 10 (05):

← 1 2 3 4 5 →