Crack initiation and growth analysis in explosively welded AA2519-AA1050-Ti6Al4V layered material in ambient and cryogenic conditions

被引：5

作者：

Boronski, Dariusz ^{[1
]}

Kotyk, Maciej ^{[1
]}

Mackowiak, Pawel ^{[1
]}

机构：

[1] UTP Univ Sci & Technol, Fac Mech Engn, Al Prof S Kaliskiego 7, PL-85791 Bydgoszcz, Poland

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE | 2018年 / 232卷 / 08期

关键词：

Explosive welding; AA2519 aluminum alloy; Ti6Al4V titanium alloy; AA2519-AA1050-Ti6Al4V layered material; fatigue; cryogenic; CYCLE FATIGUE PROPERTIES; MECHANICAL-PROPERTIES; BIMATERIAL INTERFACE; ALUMINUM-ALLOYS; BEHAVIOR; PROPAGATION; TITANIUM; TEMPERATURES; PLASTICITY; FRACTURE;

D O I：

10.1177/0954406217741516

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The article presents the results of an analysis of the crack growth and fatigue life of CT specimens made of explosively welded AA2519-AA1050-Ti6Al4V layered material for the construction of air and space structures. The investigations were carried out for two temperature conditions: ambient temperature (293K) and under cryogenic conditions at the temperature of liquid nitrogen (77K). The analysis of the test results revealed the impact of cryogenic conditions on the process of fatigue cracking of a layered material. However, this impact is partly limited by a significant scatter of the test results, which may be caused by the different character of the process of cracking.

引用

页码：1470 / 1480

页数：11

共 50 条

[21] The Mechanical Properties of Composites AA.2519-Ti6Al4V Obtained by Detonation Method
Sniezek, L.
Szachogluchowicz, I.
Gocman, K.
INTELLIGENT TECHNOLOGIES IN LOGISTICS AND MECHATRONICS SYSTEMS, ITELMS 2013, 2013, : 214 - 219
[22] EXPLOSIVE CLADDING OF TITANIUM AND ALUMINIUM ALLOYS ON THE EXAMPLE OF Ti6Al4V-AA2519 JOINTS
Galka, A.
Najwer, M.
ARCHIVES OF METALLURGY AND MATERIALS, 2015, 60 (04) : 2985 - 2991
[23] Testing of AA2519/TI6AL4V laminate for resistance on dynamic impact of the targets
Sniezek, L.
Szachogluchowicz, I.
Hutsaylyuk, V.
INTELLIGENT TECHNOLOGIES IN LOGISTICS AND MECHATRONICS SYSTEMS - ITELMS'2015, 2015, : 238 - 244
[24] CRACK INITIATION AND MICROSTRUCTURALLY SHORT CRACK GROWTH OF Ti-6Al-4V
Christ, Hans-Juergen
Knobbe, Helge
Koester, Philipp
Fritzen, Claus-Peter
Riedler, Martin
TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND INTERFACES, 2012, : 903 - 910
[25] Low cycle fatigue properties of AA2519-Ti6Al4V laminate bonded by explosion welding
Szachogluchowicz, Ireneusz
Sniezek, Lucjan
Hutsaylyuk, Volodymyr
ENGINEERING FAILURE ANALYSIS, 2016, 69 : 77 - 87
[26] Experimental study on ballistic AA 2519 / Ti6Al4V laminate according to STANAG 4569 Level 1
Szachogluchowicz, I
Sniezek, L.
Mierzynski, J.
Koperski, W.
11TH INTERNATIONAL CONFERENCE ON INTELLIGENT TECHNOLOGIES IN LOGISTICS AND MECHATRONICS SYSTEMS (ITELMS'2016), 2016, : 155 - 163
[27] SUBSURFACE CRACK INITIATION IN HIGH CYCLE FATIGUE OF TI-6AL-4V ALLOYS AT CRYOGENIC TEMPERATURES
UMEZAWA, O
NAGAI, K
ISHIKAWA, K
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1990, 76 (06): : 924 - 931
[28] Microstructural characterisation of rotary friction welded AA6082 and Ti-6Al-4V dissimilar joints
Meisnar, M.
Baker, S.
Bennett, J. M.
Bernad, A.
Mostafa, A.
Resch, S.
Fernandes, N.
Norman, A.
MATERIALS & DESIGN, 2017, 132 : 188 - 197
[29] Corrosion mechanism of the Ti-6Al-4V/AA6061 dissimilar metal CMT welded joint
Xu, Hao
Cao, Rui
Ma, Xianglong
Yan, Yingjie
Fan, Ding
Dong, Hongbiao
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2025, 35 : 6951 - 6964
[30] Crystallography of Fatigue Crack Initiation and Growth in Fully Lamellar Ti-6Al-4V
Pilchak, A. L.
Williams, R. E. A.
Williams, J. C.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (01): : 106 - 124

← 1 2 3 4 5 →