Multilayer of Ni/Cu Coating Produced Via Electroplating Process

被引：2
|
作者：
Jikan, S. S. [1 ]
Abdullah, S. S. [1 ]
Ismail, M. H. [2 ]
Ismail, N. A. [2 ]
Badarulzaman, N. A. [2 ]
机构：
[1] UTHM, Fac Sci Technol & Human Dev, Batu Pahat, Malaysia
[2] UTHM, Fac Mech & Mfg Engn, Engn Mat Alliance ENIGMA, Johor Baharu, Malaysia
来源：
4TH MECHANICAL AND MANUFACTURING ENGINEERING, PTS 1 AND 2 | 2014年 / 465-466卷
关键词：
Electroplating; Multilayer; Cu/Ni; Vickers Hardness; HARDNESS;
D O I：
10.4028/www.scientific.net/AMM.465-466.891
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Nickel (Ni)/ Copper (Cu) multilayer were deposited on Cu substrate by electroplating process using dual bath technique. Individual sample of multilayer with sublayer thicknesses of 1 mu m, 5 mu m, 10 mu m and 50 mu m have been produced. The structure of the multilayer was characterized by X-Ray Diffraction and Scanning Electron Microscopy whereas one of the mechanical properties of the samples was investigated by means of Vickers Hardness. The results showed that the surface hardness of the coated Cu substrate increases if compared to that of pure Cu substrate. Additionally, these values increased when sublayer thickness of samples were decreased.
引用
收藏
页码：891 / +
页数：2
相关论文
共 50 条
  • [1] Study on planarizing process for high aspect ratio via-holes using for electroplating and apply to process for Cu/polyimide multilayer substrates
    Tenmei, H
    Yamazaki, T
    Narizuka, Y
    2ND 1998 IEMT/IMC SYMPOSIUM, 1998, : 224 - 229
  • [2] Study on Ni-Ni(S)-Ni(P) multilayer coating by friction-assisted jet electroplating on sintered NdFeB
    Jiang, Wei
    Shen, Lida
    Wang, Kai
    Xu, Mingyang
    Tian, Zongjun
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 787 : 1089 - 1096
  • [3] Effect of Ni Underlayer Thickness on The Hardness and Specific Wear Rate of Cu in The Laminated Ni/Cu Coatings Produced by Electroplating
    Riyadi, Tri Widodo Besar
    Sarjito
    Anggono, Agus Dwi
    Masyrukan
    Eryawan, Aan
    HUMAN-DEDICATED SUSTAINABLE PRODUCT AND PROCESS DESIGN: MATERIALS, RESOURCES, AND ENERGY, 2018, 1977
  • [4] Study on Electrical Explosion Properties of Cu/Ni Multilayer Exploding Foil Prepared by Magnetron Sputtering and Electroplating
    Lei, Fan
    Ye, Qin
    Yang, Shuang
    Fu, Qiubo
    MICROMACHINES, 2020, 11 (05)
  • [5] Effect of Cu in electroless Ni-Cu-P coating on passivation process
    Gan, Yiwei
    Zhao, Tingting
    Kang, Zhixin
    Sang, Jing
    SURFACE AND INTERFACE ANALYSIS, 2017, 49 (03) : 190 - 196
  • [6] Electroless Ni-P coating on W-Cu alloy via potential activation process
    Wang, L. L.
    Chen, H. J.
    Huang, W. Q.
    Hao, L.
    SURFACE ENGINEERING, 2009, 25 (05) : 376 - 381
  • [7] Resistivity of Cu-Ni/Cu/Cu-Ni multilayer materials
    Nakamura, Keishi
    Sakagami, Yasunori
    Kikuchi, Shiomi
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2007, 71 (02) : 270 - 274
  • [8] CHARACTERIZATION OF NI-CU ALLOY POWDERS PRODUCED BY THE ATOMIZATION PROCESS
    SALGADO, L
    FILHO, FA
    DASNEVES, MDM
    POLA, EJG
    DESOUZA, OC
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 133 : 692 - 697
  • [9] Effect of Current Density on Microstructure of Mn-Cu Thin Films via Electroplating Coating Technique
    Far, Maryam Haeri
    Zandrahimi, Morteza
    ULTRAFINE GRAINED AND NANO-STRUCTURED MATERIALS IV, 2014, 829 : 451 - 455
  • [10] Study of the electroplating process parameters on the electrical resistance of an aluminium alloy with a Cu-graphene-based coating
    Di Siena, Mario
    Genna, Silvio
    Guarino, Stefano
    Ucciardello, Nadia
    SURFACE ENGINEERING, 2023, 39 (01) : 90 - 101
12345