Effect of retained austenite on austenite memory of a 13% Cr-5% Ni martensitic

被引:41
|
作者
Liu, L. [1 ]
Yang, Z. -G. [1 ]
Zhang, C. [1 ]
机构
[1] Tsinghua Univ, Key Lab Adv Mat, Minist Educ, Dept Mat Sci & Engn, Beijing 100084, Peoples R China
基金
中国国家自然科学基金;
关键词
13Cr-5Ni martensitic steel; Confocal laser scanning microscope; Austenite memory; In situ observation; Retained austenite; Tempered martensite decomposition; TRANSFORMATION; STEEL;
D O I
10.1016/j.jallcom.2012.04.021
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The effect of retained austenite on the microstructure evolution from martensite to austenite in relation to austenite memory of a 13% Cr-5% Ni martensitic steel was studied. In situ observations by confocal laser scanning microscope suggested that austenite memory occurred during the reverse transformation from martensite (alpha) to austenite (gamma) in the presence of retained austenite, but was absent in a fully martensitic sample. The microstructure evolution during intercritical tempering treatment in the alpha-gamma two phase region indicated that, reversed austenite formed in the retained austenite containing steel by using the pre-existing retained austenite as a substrate; it also bore the Kurdjumov-Sachs (K-S) orientation relationship with the martensite matrix and was stabilized by Ni enrichment. For the fully martensitic sample, a certain amount of martensite re-transformed to austenite while the rest transformed to tempered martensite; the tempered martensite then decomposed to ferrite with (Cr, Mo)(23)(C, N)(6) precipitates. Austenite memory was absent due to the decomposition of the tempered martensite in the austenization process. Effect of the retained austenite on the reversion process from martensite to austenite was discussed in detail. A mechanism by which the retained austenite affected austenite memory was proposed. (C) 2012 Elsevier B.V. All rights reserved.
引用
收藏
页码:S654 / S660
页数:7
相关论文
共 50 条
  • [41] Effect of the work-hardening of retained austenite on the martensitic transformation in a trip-aided steel
    Godet, S
    Jacques, P
    Delannay, F
    ADVANCES IN MECHANICAL BEHAVIOUR, PLASTICITY AND DAMAGE, VOLS 1 AND 2, PROCEEDINGS, 2000, : 835 - 840
  • [42] Role of the retained austenite on the mechanical properties of 13Cr-4NiMo weld metals
    Bilmès, PD
    Llorente, CL
    Solari, M
    HEAT TREATING, VOLS 1 AND 2, PROCEEDINGS, 2000, : 556 - +
  • [43] EFFECT OF AUSTENITE ORDERING ON THE MARTENSITIC TRANSFORMATION IN Fe-Ni ALLOYS.
    Yan Linfa
    Xu, Zuyao
    Jinshu Xuebao/Acta Metallurgica Sinica, 1986, 22 (05):
  • [44] STUDY OF THE STEEL SHEET CONTAINING RETAINED AUSTENITE .2. THE EFFECT OF RETAINED AUSTENITE ON THE DUCTILITY OF STEEL SHEETS
    MATSUMURA, O
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1293 - 1293
  • [45] The effect of quench cracks and retained austenite on the hydrogen trapping capacity of high carbon martensitic steels
    Pinson, M.
    Springer, H.
    Depover, T.
    Verbeken, K.
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2021, 46 (29) : 16141 - 16152
  • [46] EFFECT OF RETAINED AUSTENITE ON THE LIFE OF STEEL BALLS
    HISHIKI, M
    HORI, T
    KOHNO, H
    KAWABE, H
    UEMURA, M
    BULLETIN OF THE JAPAN SOCIETY OF PRECISION ENGINEERING, 1979, 13 (01): : 49 - &
  • [47] The Effect of Surface Preparation on Retained Austenite Measurement
    Yu, Haixuan
    Lu, Yuan
    Xu, Yangzi
    Sisson, Richard D., Jr.
    100 YEARS OF E04 DEVELOPMENT OF METALLOGRAPHY STANDARDS, 2019, 1607 : 12 - 20
  • [48] Cryogenic stability of retained austenite in Fe–Cr–Ni weld metals obtained by laser welding
    Dongqun Xin
    Shun Lu
    Yan Cai
    Xueming Hua
    Journal of Materials Science, 2021, 56 : 13841 - 13858
  • [49] EFFECT OF RETAINED AUSTENITE UPON MECHANICAL PROPERTIES
    CASTLEMAN, LS
    AVERBACH, BL
    COHEN, M
    TRANSACTIONS OF THE AMERICAN SOCIETY FOR METALS, 1952, 44 : 240 - 263
  • [50] THE EFFECT OF AUSTENITE ORDERING ON THE MARTENSITIC-TRANSFORMATION IN FE-NI ALLOYS
    HSU, TY
    YAN, LF
    METALLOGRAPHY, 1984, 17 (04): : 397 - 409