Experimental studies on stiffened plates under in-plane load and lateral pressure

被引：35
|
作者：
Shanmugam, N. E. [1 ]
Zhu Dongqi [2 ]
Choo, Y. S. [2 ]
Arockiaswamy, M. [3 ]
机构：
[1] Natl Univ Malaysia, Dept Civil & Struct Engn, Ukm, Bangi Selangor, Malaysia
[2] Natl Univ Singapore, Dept Civil & Environm Engn, Singapore 117548, Singapore
[3] Florida Atlantic Univ, Dept Civil Engn, Boca Raton, FL 33431 USA
来源：
THIN-WALLED STRUCTURES | 2014年 / 80卷
关键词：
Stiffened plates; Plate slenderness ratio; Experiments; In-plane load; Lateral pressure; Finite element modelling; ULTIMATE STRENGTH FORMULATIONS; PANELS;
D O I：
10.1016/j.tws.2014.02.026
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
An experimental study on stiffened plates subjected to combined action of in-plane load and lateral pressure is described in the paper. Details of the experiments and finite element analyses of the specimens tested are presented along with the results. Measurements of initial imperfection in the specimens have been made and included in the analyses. Results show that lateral load carrying capacity of stiffened plate drops with increase in axial load and vice-versa. It is found that plate slenderness ratio has significant influence on the ultimate load capacity of stiffened plates subjected to both in-plane load and lateral pressure. Increase of plate slenderness ratio results in a decrease of ultimate load capacity of stiffened plate. The accuracy of the finite element modelling is established by comparing the results with the corresponding experimental values. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：22 / 31
页数：10
相关论文
共 50 条
  • [11] Effect of dishing on in-plane stiffness of stiffened plates
    Geiro, A
    Grundy, P
    PROCEEDINGS OF THE SIXTH (1996) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL IV, 1996, 1996, : 352 - 355
  • [12] Plates with holes under lateral load pressure
    Mínguez, JM
    Vogwell, J
    ENGINEERING FAILURE ANALYSIS, 1998, 5 (04) : 299 - 315
  • [13] EXPERIMENTAL AND ANALYTICAL STUDY OF VIBRATING STIFFENED RECTANGULAR PLATES SUBJECTED TO IN-PLANE LOADING
    SMITH, GA
    LAURA, PA
    MATIS, M
    JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 1970, 48 (03): : 707 - &
  • [14] Influence of stiffener location on the stability of stiffened plates under compression and in-plane bending
    Bedair, OK
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1997, 39 (01) : 33 - 49
  • [15] Stability analysis of composite plates under localized in-plane load
    Daripa, Rupesh
    Singha, M. K.
    THIN-WALLED STRUCTURES, 2009, 47 (05) : 601 - 606
  • [16] Empirical formulations for estimation of the ultimate strength of the perforated stiffened panels under the combined lateral pressure and in-plane compression
    Han, Poknam
    Pak, CholJun
    Yun, Cholil
    Ri, Kwangchol
    Choe, Tongil
    OCEAN ENGINEERING, 2022, 266
  • [17] The in-plane shear failure of transversely stiffened thin plates
    Loughlan, J.
    Hussain, N.
    THIN-WALLED STRUCTURES, 2014, 81 : 225 - 235
  • [18] BUCKLING OF STIFFENED PLATES UNDER AXIAL-COMPRESSION AND LATERAL PRESSURE
    DANIELSON, DA
    CRICELLI, AS
    FRENZEN, CL
    VASUDEVAN, N
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1993, 30 (04) : 545 - 551
  • [19] STRENGTH OF SHIPS’ GRILLAGES UNDER LATERAL LOAD AND IN-PLANE COMPRESSION
    Lokshin, A.Z.
    Mishkevich, V.G.
    Ivanov, L.D.
    Transactions of the Royal Institution of Naval Architects Part A: International Journal of Maritime Engineering, 2014, 156 (3 A):
  • [20] STRENGTH OF SHIPS' GRILLAGES UNDER LATERAL LOAD AND IN-PLANE COMPRESSION
    Lokshin, A. Z.
    Mishkevich, V. G.
    Ivanov, L. D.
    INTERNATIONAL JOURNAL OF MARITIME ENGINEERING, 2014, 156 : 221 - 242
12345