FILM COOLING PERFORMANCE OF CYLINDRICAL HOLES EMBEDDED IN A TRANSVERSE TRENCH

被引：52

作者：

Lee, Ki-Don ^{[1
]}

Kim, Kwang-Yong ^{[1
]}

机构：

[1] Inha Univ, Dept Mech Engn, Inchon 402751, South Korea

来源：

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS | 2014年 / 65卷 / 02期

基金：

新加坡国家研究基金会;

关键词：

SHAPED HOLES; CONFIGURATIONS;

D O I：

10.1080/10407782.2013.826106

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The film cooling performance of cylindrical holes embedded in a transverse trench is evaluated for various shapes of the trench and blowing ratios, and an optimum geometry for the trenched film-cooling hole is suggested. In order to analyze the turbulent flow and film cooling performance, three-dimensional Reynolds-averaged Navier-Stokes analysis is performed using the shear stress transport turbulence model. Tetrahedral and hexahedral computational meshes are tested, and the numerical solution is validated by comparison with experimental data. A parametric study with two geometric variables, the height and width of the trench, is performed. From the results of the parametric study and flow field analysis, shifting the film cooling hole toward the upstream end of the trench is proposed to enhance film cooling performance. In addition, the optimum downstream trench width is determined.

引用

页码：127 / 143

页数：17

共 50 条

[41] HIGH RESOLUTION HEAT TRANSFER MEASUREMENTS OF CYLINDRICAL HOLES EMBEDDED IN A TRENCH WITH BACKWARD INJECTION
Shi, Bo
Li, Xueying
Ren, Jing
Jiang, Hongde
[J]. PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2018, VOL 5C, 2018, : 511 - 520
[42] Bump and trench modifications to film-cooling holes at the vane endwall junction
Sundaram, N.
Thole, K. A.
[J]. PROCEEDINGS OF THE ASME TURBO EXPO 2007, VOL 4, PTS A AND B, 2007, : 197 - 207
[43] The overall film cooling performance of crescent holes
Wang, Qiuyin
Duan, Xiaozhi
Zhou, Chao
[J]. INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES, 2024, 41 (04) : 865 - 877
[44] Numerical investigation on the effect of different transverse trench configurations on film cooling effectiveness
Zhang, Da-Hai
Chen, Qiu-Yang
Zeng, Min
Luo, Lai-Qin
Zhang, Dong-Jie
Wang, Qiu-Wang
[J]. Hangkong Dongli Xuebao/Journal of Aerospace Power, 2008, 23 (04): : 611 - 616
[45] Effects of Obstructions and Surface Roughness on Film Cooling Effectiveness With and Without a Transverse Trench
Somawardhana, Ruwan P.
Bogard, David G.
[J]. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2009, 131 (01):
[46] Effects of obstructions and surface roughness on film cooling effectiveness with and without a transverse trench
Somawardhana, Ruwan P.
Bogard, David G.
[J]. PROCEEDINGS OF THE ASME TURBO EXPO 2007, VOL 4, PTS A AND B, 2007, : 789 - 797
[47] Effect of external turbulence on the efficiency of film cooling with coolant injection into a transverse trench
Khalatov A.A.
Panchenko N.A.
Severin S.D.
[J]. Thermal Engineering, 2017, 64 (9) : 686 - 693
[48] EFFECTS OF INTERNAL COOLANT CROSSFLOW ON FILM-COOLING PERFORMANCE OF DOUBLE-JET AND CYLINDRICAL HOLES
Zhu, Huaitao
Xie, Gongnan
Zhu, Rui
Sunden, Bengt
[J]. PROCEEDINGS OF ASME TURBO EXPO 2022: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2022, VOL 6A, 2022,
[49] Numerical investigation of film cooling flow induced by cylindrical and shaped holes
Barthet, S
Kulisa, P
[J]. HEAT TRANSFER IN GAS TURBINE SYSTEMS, 2001, 934 : 369 - 376
[50] Experimental investigation of the film cooling performance by triangular-shaped thin plates on inclined cylindrical holes
Choi, Jaemun
Choi, Jaehun
Kwon, Hwabhin
Jang, Hoyong
Park, Heesung
[J]. FRONTIERS IN ENERGY RESEARCH, 2022, 10

← 1 2 3 4 5 →